[Stoves] Going back to 3-Stone Fire [Was Re: Chinaandcookstoves]

Kirk H. gkharris316 at comcast.net
Tue Dec 19 14:18:03 CST 2017


Crispin, 

The fact that you did not mention sensors is the problem because sensors were in my question.  
Since your response did not answer my question but rather pushed your anti-WBT agenda, I had no choice but to guess.  I did not impute disagreements, I could only guess that your disagreement extended to the sensors and filters.  If they did not then you should have made that clear in your response instead of pushing your agenda.  I quite clearly asked if the CCT is included in the disagreement.  No answer in your response.  I could only make guesses, because your response was so far off from answering my question.  All I wanted was for my question to be answered. 

Aside from this, thank you for answering my question in this last contribution.  No you do not include the sensors and filters in the disagreement.  I can now feel comfortable that the CO, CO2, and particulate results are not in dispute.

When will these other better tests be available for me to use?

Kirk H.


Sent from Mail for Windows 10

From: Crispin Pemberton-Pigott
Sent: Tuesday, December 19, 2017 4:39 AM
To: Discussion of biomass cooking stoves
Subject: Re: [Stoves] Going back to 3-Stone Fire [Was Re: Chinaandcookstoves]

Dear Kirk

I made no mention at all of sensors or quality of equipment, which is not specified in the WBT. I think it is not helpful for you or Ron or anyone to impute disagreements where there are none. The WBT is a test protocol that includes a test method and  a set of calculations. What it your point is saying ‘it includes the CCT’ because it doesn’t exclude it? Seriously: what is your theory of change? Shooting messengers, even hosts of them, does not change the message.

Conceptually there is nothing wrote with heating or boiling water. If you want really accurate results, heat water, don’t boil it – a point repeatedly emphasized by Prof Lloyd. There is a paper called “From Water Boiling Test to Water Heating Test” which explores this, (From WBT to WHT, it is called).

If you want even more accurate assessments of your product, use formulas that are derived from first principles. That exercise has  been done very by the SeTAR Centre and is why the HPT was created – as a way of avoiding all the historical errors that have accumulated in the WBT.  I mentioned the LVH error in the list of woods at the back of the spreadsheet. That error was identified in 1987 by Sam Baldwin, someone highly praised in certain circles. Yet after 30 year (!) it has still not been corrected by Shell, Berkeley, Aprovecho, Tami Bond and ETHOS nor the EPA and GACC. 

How long should we wait for something as simple as a an error in the LHV from HHV calculation to be implemented? Do you agree 30 years is a bit excessive (and still not corrected) is a bit excessive?

Why should anyone take seriously the system of informal management of its “main messenger” that cannot gets its technical house in order? I don’t. Neither does Xavier. Not Jiddu. Nor the Indian government nor the Chinese government nor many others. 

Regards
Crispin




From: Stoves [mailto:stoves-bounces at lists.bioenergylists.org] On Behalf Of Kirk H.
Sent: 19-Dec-17 12:25
To: Discussion of biomass cooking stoves <stoves at lists.bioenergylists.org>
Subject: Re: [Stoves] Going back to 3-Stone Fire [Was Re: Chinaandcookstoves]

Thank you for your response.  My question was if the disagreement was with all parts of the test or just the water boiling part.  I guess your answer means that the disagreement is with all parts of the test including the CO sensors, CO2 sensors, particulate sensors and the weighing of the filters, as well as the water boiling portion.  When you say WBT, you mean all of this, not just the water boiling in the pot.  I also assume that the CCT is included in this, since your response did not exclude it.  But since I have nothing else available for my use I will continue as is.

I was using my stove to compare only because it and the fuel were constant between Aprovecho and LBNL and the results were similar, not to flaunt it as a clean stove.  Sorry about the misunderstanding.  

Kirk H.

Sent from Mail for Windows 10

From: Crispin Pemberton-Pigott
Sent: Monday, December 18, 2017 7:24 PM
To: Stoves
Subject: Re: [Stoves] Going back to 3-Stone Fire [Was Re: Chinaandcookstoves]

Dear Kirk

No thinks your stove isn't 'clean and efficient'.‎ In truth we don't know what the performance is because none of the WBT spreadsheets for it are not available from Aprovecho (so you said when I asked) and LBNL not only doesn't share the spreadsheet behind the performance claims, they do their own evaluation using their own method (I wrote to them and asked specifically about your stove).

In the real world. This is simply unacceptable. We do not accept anyone's performance rating for which we do know know the method and calculations. 

Similarly, the calculations done in the EPA are not entirely in accordance with the WBT (I asked Jim Jetter for a copy of any stove test to see). 

The ratings provided by LBNL and EPA Lab may reflect the actual performance on the WBT tasks quite well. No one knows for sure. As I have no need for performance not reflecting use, I don't use the cooking cycle or the calculations OD the WBT. 

I do know that both those labs report using IWA metrics without any caution that the 'fuel consumption' per litre boiled or simmered is of questionable value, or no value at all. The consumer of the information is left with the impression that the numbers are meaningful which they may not be. To me that is at least, deceptive because both labs ae aware of the controversy and implications for the product ratings. 

It is telling that students at Berkeley are still using the WBT3.0 in view of the fact none of its descendants have been peer reviewed.  

The WBT should be eschewed and it's outputs ignored. It is unreliable in the strictest sense of the word. 

Regards 
Crispin 


Xavier,
 
I am surprised to read that you don’t know whether you disagree with the sensors, computer graphs, and filters along with the water boiling portion of the test.  I did not specify Aprovecho’s equipment in my question.  I tested the same stove on both Aprovecho’s and Lawrence Berkley National Lab’s equipment, and the tests both showed a very clean stove.  Does the disagreement include Lawrence Berkley National Lab’s sensors, computer graphs, and filters along with the boiling water portion of the test?  What exactly do those who disagree with the WBT, disagree with, just the water boiling portion of the test or the overall test?  Is the Controlled Cooking portion of the test also included in this disagreement?
 
Kirk H.
 
Sent from Mail for Windows 10
 
From: Xavier Brandao
Sent: Monday, December 18, 2017 3:29 PM
To: 'Discussion of biomass cooking stoves'
Subject: Re: [Stoves] Going back to 3-Stone Fire [Was Re: Chinaandcookstoves]
 
Dear Kirk,
 
“Do you disagree with the sensors, computer graphs, and filters along with the boiling water?“
I don’t really know about that. I believe Crispin said the measurements from Aprovecho equipment was unreliable.
Other than that, the PEMS was breaking down all the time at Prakti, and I believe there are other cases where it happened.

Best,
 
Xavier
 
De : Stoves [mailto:stoves-bounces at lists.bioenergylists.org] De la part de Kirk H.
Envoyé : samedi 16 décembre 2017 00:55
À : Discussion of biomass cooking stoves
Objet : Re: [Stoves] Going back to 3-Stone Fire [Was Re: China andcookstoves]
 
I have a question.
 
When I test a stove I see sensors, computer graphs and filters along with the pot of water.  Do you disagree with the sensors, computer graphs, and filters along with the boiling water?  The water boiling portion of the overall test appears to attract your attention.  How much of the overall test do you disagree with?  What do you mean when you disagree with the WBT, are you including the sensors, computer graphs and filters?
 
Kirk H.
 
Sent from Mail for Windows 10
 
 

Garanti sans virus. www.avast.com 
 
 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20171219/840dd686/attachment.html>


More information about the Stoves mailing list