[Stoves] Lo-fi ELSA stove
Frank Shields
franke at cruzio.com
Fri Feb 17 20:42:28 CST 2017
David
Well done video. I enjoyed seeing how you made the stove and how well it worked. Thanks
Sent from my iPhone
> On Feb 17, 2017, at 4:54 PM, Frank Shields <franke at cruzio.com> wrote:
>
>
>> On Feb 17, 2017, at 10:14 AM, David Young <dyoung at pobox.com> wrote:
>>
>> I have built the ELSA stove that's
>> documented here, https://www.youtube.com/watch?v=55r5DmvT3XE .
>>
>> I started with a stainless steel trashcan that had seen better days. I
>> unrolled it and glued on ELSA stove blueprints from the web. Then I cut
>> out the shapes with a 24 tpi bimetal blade in a jigsaw.
>>
>> I don't have an anvil, or the sheet-metal "curling" tool (is there a
>> name for it?) that is shown in the video. I bent the metal over some
>> angle-iron, and I made the tool from some stainless tubing I bought at
>> the hardware store.
>>
>> I couldn't get the stove to light until I used the lighting cylinder,
>> which is shown in the video, for some extra draft. I used brown packing
>> paper as tinder, and wood pellets as fuel.
>>
>> I attached a couple of photos. One shows the stove itself. You can
>> see that I'm an amateur fabricator. The other shows the stove under a
>> kettle. A lot of condensation forms on the kettle and, after the stove
>> has burned out, there is a thick layer of creosote on part of the kettle.
>>
>> To avoid the creosote formation, I'm not sure if I should raise the
>> kettle to give the flame more time to burn out, or lower the flame by,
>> say, centrally introducing preheated secondary air---I am thinking of
>> Kirk Harris' design.
>>
>> Dave
>>
>> --
>> David Young
>> dyoung at pobox.com Urbana, IL (217) 721-9981
>> <FullSizeRender.jpg><IMG_3298.JPG>_______________________________________________
>> Stoves mailing list
>>
>> to Send a Message to the list, use the email address
>> stoves at lists.bioenergylists.org
>>
>> to UNSUBSCRIBE or Change your List Settings use the web page
>> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>>
>> for more Biomass Cooking Stoves, News and Information see our web site:
>> http://stoves.bioenergylists.org/
>>
>
> Thanks
>
> Frank
> Frank Shields
> Gabilan Laboratory
> Keith Day Company, Inc.
> 1091 Madison Lane
> Salinas, CA 93907
> (831) 246-0417 cell
> (831) 771-0126 office
> fShields at keithdaycompany.com
>
>
>
> franke at cruzio.com
>
>
>
>
> _______________________________________________
> Stoves mailing list
>
> to Send a Message to the list, use the email address
> stoves at lists.bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>
> for more Biomass Cooking Stoves, News and Information see our web site:
> http://stoves.bioenergylists.org/
>
More information about the Stoves
mailing list