<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><div>For all you pellet, sausage-size-biomass fuel-needing stovers, we are playing with an adaptor for the conventional batch-fed cylinder press to allow one to make multiple quantities of anything from sausage sizes down to pellets.</div><div><br></div><div>The idea is being co-vented as we speak and its very much 'open-source', so please , feel free to dive in with design thoughts, all. </div><div>Although in this sketch, I suggest using metal pipes welded together, there is in retrospect, little reason it could not be made out of just a cylindrical block of wood. </div><div style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><div><br></div><div>In this design you would not be pushing the piston completely through the cylinder (as you do with many of the conventional briquette.presses) The material would just be coming out the tubes and breaking off (or, it could be cut off) at a certain length. </div><div>Please be first on the block to try it out. If it can work for you, it will help many with their many different types of briquette presses, in the network. </div><div><br></div><div>Basi Haya, na aluta Continua,</div><div><br></div><div>Richard</div><div><a href="http://www.legacyfound.org/">www.legacyfound.org</a> </div><div>Arusha Tanzania </div><div><img id="56d8b06e-c94b-45de-b4d4-00735cf94513" height="542" width="480" apple-width="yes" apple-height="yes" src="cid:108091F9-79D4-4D04-AEEA-365A6B8956E0"><img id="74a383e0-d3d6-457e-8e04-ec0054a27754" height="547" width="359" apple-width="yes" apple-height="yes" src="cid:487535D3-1B14-4559-92B0-1C8BE3517379"></div></div></body></html>