<p class="MsoNormal">Dear Crispin,</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">As far as I know the difference between kerosene (paraffin)
and higher hydrocarbon fractions, including vegetable oils is the fact that
they are not distillable under atmospheric pressure.</p>

<p class="MsoNormal">Undistillable hydrocarbons are fed into the fire as a spray
of very fine droplets that burn completely. The same could be done with
vegetable oils at the combustor end. However, most vegetable oils tend to react
slowly with oxygen to form gunk which eventually blocks the passages it has to
flow through.</p>

<p class="MsoNormal">So for a stove that burns vegetable oil, the piping from the
storage to the burner should be of very simple shape and easy to clean.</p>

<p class="MsoNormal">Realising that producing a spray of fine droplets is out of
the question for domestic stoves, we have to find something that feeds the oil
to the combustion zone where the carbon, resulting from the decomposition of
the oil is burnt as well. Possibly something like a perforated disk where the
oil burns in updraft mode and where the holes occupy a sufficient part of the
disk area that all the char comes in contact with air.</p>

<p class="MsoNormal">Does the Protos stove have any relation to Siemens. If so
they should hang their head in shame, not having read up on the properties of vegerable
oil.</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">All the best,</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Piet</p>