Here's a related question,<br><br>Suppose I have a vertical metal cylinder that is being heated by combustion gases from the inside - for the sake of argument - like a 48" length of 12" diameter 316 stainless steel flue pipe.<br>
<br>Let's assume that this pipe is getting hot - dull orange, even when the outer surface is exposed to free air.<br><br>If I then enclose this pipe in an annular sleeve - again 48" long - open at each end,  like a 14" diameter tube - so that there is a 1" annular gap for air to freely be drawn into, will the effect of this sleeve create a beneficial flue effect, and increase the velocity of the cooling air draught around the flue pipe?<br>
<br>I'm considering this arrangement as a means of delivering preheated air, and providing cooling to a large woodgas burner.<br><br>Any thoughts <br><br><br><br>Ken <br>