<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <div class="moz-cite-prefix">Hi Dean,<br>
      I'm a bit confused by your first sentence. You seem to be
      suggesting  that there is a blue flame before the bottom is bright
      orange. <br>
      <br>
      Tell me if this makes any  sense.<br>
      <br>
      In a TLUD the bio-char doesn't start to burn until the pyrolysis
      front reaches the bottom. At that time the bottom is glowing
      bright orange and char oxidation is taking place. The hot CO2
      formed at the bottom then may reduce to CO as it passes hot carbon
      above the bottom layer. This CO can then burn with additional air
      in a blue flame above.<br>
      <br>
      This is somewhat stove dependent but there can be some tar
      condensation on the fuel chamber walls during pyrolysis. During
      the char burning phase and perhaps in this case at the end when
      the top of the char pile is radiant orange, this layer of tar
      could re-volatize and mix with the CO to form a higher energy
      flame with a reddish component. It would also be helpful if we
      knew what the excess air values were during these phases.<br>
      <br>
      My two sense,<br>
      <br>
      Alex<br>
      <br>
      On 23/09/2012 8:10 PM, Dean Still wrote:<br>
    </div>
    <blockquote
cite="mid:CA+tShZsb_9_oELi4R+e_p259fv2fVx72ucVo2HLtAJKoVtqTyg@mail.gmail.com"
      type="cite">Hi Stovers!
      <div><br>
      </div>
      <div>I've been noticing a shift from blue flames above the burning
        bio-char in a TLUD to purple flames nearer the end of the burn
        when the bottom of the pile is glowing bright orange. I suppose
        that the blue flame is caused by burning CO but I wonder why the
        purple forms after the blue? The blue self sustaining flame
        doesn't heat the water in the pot as well as the purple flame
        phase although the pile of bio-char is fully ignited at that
        time and may account for the more rapid rise in water
        temperature.</div>
      <div><br>
      </div>
      <div>Any ideas?</div>
      <div><br>
      </div>
      <div>Best,</div>
      <div><br>
      </div>
      <div>Dean</div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a>

to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>

for more Biomass Cooking Stoves,  News and Information see our web site:
<a class="moz-txt-link-freetext" href="http://www.bioenergylists.org/">http://www.bioenergylists.org/</a>

</pre>
    </blockquote>
    <br>
  </body>
</html>