<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">Richard,<br>
<br>
I hope someone tries it, but not me. I see some difficulties:<br>
<br>
1. if the mixture is not equally into all four spaces, the
pressure will mostly be on the one with the most material,
resulting in less compression on the less filled ones. This
makes filling more complicated to do it right.<br>
<br>
2. Each of the four "wedge" segments is somewhat tall. Maybe
fine, but maybe not.<br>
<br>
3. When extracting the wedges, they do not stay together, a
implied in the diagram of the finished product. Separate and
thin, they could be breaking in shipping.<br>
<br>
4. and I am not very comfortable about the piston/plunger being
strong in those 4 "legs", and there could easily be material
buildup in the slots. And substantially more side friction.<br>
<br>
On the other hand, just might work.<br>
<br>
My method of putting marks (depressions) into briquettes (by
having about 1 cm blades as a + on the plunger works. I
have shown it many places, but nobody has taken it up yet. Maybe
we will in Uganda.<br>
<br>
Paul <br>
<br>
<pre class="moz-signature" cols="72">Paul S. Anderson, PhD aka "Dr TLUD"
Email: <a class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu">psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website: <a class="moz-txt-link-abbreviated" href="http://www.drtlud.com">www.drtlud.com</a></pre>
On 10/2/2012 12:21 AM, Richard Stanley wrote:<br>
</div>
<blockquote
cite="mid:9C9EEE96-D317-4F95-B046-499304DB41CA@legacyfound.org"
type="cite">
<pre wrap="">Paul, Nolbert Ssebo, and for anybodey else who may be interested.
Here is a quick and dirty design modification idea for making 6 wedgies at a time from a modified 4" (or any size) conventional cylnder/ piston arrangement. Almost any batch / lever / down fed press woud work with it too.
Caveat emptor though: WE, nor anybody we know, have never tried it, so be my guest !
It should be fairly easy to make up at nearly no cost, if you already have a cylinder laying around.
Its designed so that if you have to make a mistake, you can make it without having to invest too much money or time in it.
If you learn something in the process, please send some feedback to the group.
Tak,
Richard Stanley
<a class="moz-txt-link-abbreviated" href="http://www.legacyfound.org">www.legacyfound.org</a>
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">
On Oct 1, 2012, at 9:36 AM, Paul Anderson wrote:
Nolbert and Richard,
That is all correct in your message.
In summary, Richard, can you assist us with making briquettes acceptable for TLUDs? Chunky like 1 inch cubes and irregular shapes are fine. I like the wedges that can be made by making a 4 inch diameter briquette.
Paul
Paul S. Anderson, PhD aka "Dr TLUD"
Email: <a class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu">psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website: <a class="moz-txt-link-abbreviated" href="http://www.drtlud.com">www.drtlud.com</a>
On 10/1/2012 9:43 AM, Nolbert Muhumuza wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Doc,
The energy elaborations by Richard are awesome!
Yes indeed, we want to keep the prices of the final briquettes as low
as possible. We want to make the machines/presses as affordable as
possible meaning avoiding electricity as much as we can, BUT we also
want to get as many people/ groups making, using and selling these
briquettes.
The challenge is making acceptable briquettes for he TLUD
micro-gasfiers. The three designs we have here in Uganda at the moment
do not give us this benefit.
I will try new binders e.g. warm cassava flour, but that wont be
immediately because of the demands of setting up ABE!
I have sent another email to Mr. Epila, i hope he will reply soon, but
if they are dealing with carbonized briquettes then thats not what we
are looking for really, ya?
Regards, Nolbert.
On 01/10/2012, Paul Anderson <a class="moz-txt-link-rfc2396E" href="mailto:psanders@ilstu.edu"><psanders@ilstu.edu></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Richard and Nolbert,
1. No mixing in of charcoal fines because the briquettes are for TLUDs
and the charcoal simply passes through.
2. Please help us with some binder info. The copy of the manuals that
I bought is with Nolbert.
3. Nolbert, pay close attention to the energy numbers that Richard
provides below. We will want to use those numbers in our reports and
applications. And we want to verify those numbers in our Uganda contact.
4. Richard, please provide names and contact info of any worthy
briquette-making people in Uganda. We want to do business with
them. We know about JEEP, but they do not seem to be valid
participants at this time.
Paul
Paul S. Anderson, PhD aka "Dr TLUD"
Email: <a class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu">psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website: <a class="moz-txt-link-abbreviated" href="http://www.drtlud.com">www.drtlud.com</a>
On 9/30/2012 12:22 PM, Richard Stanley wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Paul,
Re densities, agree for that type of briquette but Ask Epila and co
about charcoal dust blends; Their densities are .5 to .7 g/cc
equivalent to most hardwood The producers will utilise waste charcoal
dust off the seller stall floor and aroud existing cooking
environments 25% of the stuff added to thea sawdust paper blend wil
double it heat value and its market value, and desnify it by providng
important infilling material. Common stuff as its popular int the
market everywhere briquettes are being produced--where there is demand
for a charcoal- like fire whis is not always the case for the cook.
Richard
PS a cautionary note for you on the good german machine: There are
many like this but they gobble energy for their operation:
viz., 14.4KW (their stated total power requirement) x 8 hrs =115 kw
hrs of energy input (thats the rough equivalent to running an 18 hp
motor say outboard engine on a boat all day long at full rated
capacity). How does THAT energy consumption compare to how much
energy you get out of the pellets, is the real question, if you are
serious about greening up the planet.
I'll stick with the hand process: 75 watts per person x 6 persons x 8
hrs 3.6kw hrs generating 500 briquettes at .3 to .5 kw energy each =
200 kw out Ratio of energy out to energy in is 200/3.6= 55,
meaning we are gettign 55x the energy out for the energy put into the
process
I think you may find that figure hard to beat by any mechanised
pelletising operation of that type--by a long shot…
On Sep 30, 2012, at 6:24 AM, Paul Anderson wrote:
Richard.
I am sending this to my associate Nolbert in Uganda. We will check on
the person you named. Any other names and addresses in Uganda would
be of great use.
Our problem in our operation in Uganda is that the briquettes are too
low in density. (sawdust and paper). Having contact with others
with more experience will be useful. We will be happy to have our
stoves use their briquettes. And maybe our company (Awamu) will get
into working relationships with some briquette makers. We can use
all the help we can get.
Paul
Paul S. Anderson, PhD aka "Dr TLUD"
<a class="moz-txt-link-abbreviated" href="mailto:Email:psanders@ilstu.edu">Email:psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website:www.drtlud.com
On 9/30/2012 2:12 AM, Richard Stanley wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Paul, Busy man…What are yo going to do when you turn 40 ?
I hold Lee in high regard: We have collaborated several times on the
press and on grinders choppers and all kinds of related stuff .
The mini compound lever press is clever: It wa first tried on our
full scale Bryant press in Mozambique in around 1996 by a local group
but was not well thought out. Lee however has done so. Its not a high
volume unit nor is it for larger diameter briquettes but for a
starter press or for continuous use by perhaps up to ten families,
its a great tool.
There is so much variability to press design needs to meed demand for
briquette shape, blend type for ocla cooking needs, and resources
and skills available for press making that a very wide variety of
presses is emerging. (There are over 25 generically different presses
that we know of –and that is by no means a comprehensive list
anymore– out in use today around the globe).
We are seeing no end in sight for briquette extension and our only
hope is that we can develop enough training capacity nationally or at
least regionally, to handle demand as it grows.
East africa is rolling along well already. In Uganda for example
there are about 100 producer groups and two differnt organisaitons
doing training all over the country. Check out Boso Epila with the
UWESO organsiation in Nagaseru hill in central part of fancy end of
Kampala.
2Tagore Crescent-Kamwokya-Kampala
Epila Bosco
Ag.Programme Director & Socio-Economic Programme Manager
UWESO
P.O.BOX 8419 Kampala (Uganda)
Tel 0392-777448 Mob +256 772 537 642
Skype: epila.bosco
<<a class="moz-txt-link-abbreviated" href="mailto:bepila@uweso.org">bepila@uweso.org</a> <a class="moz-txt-link-rfc2396E" href="mailto:bepila@uweso.org"><mailto:bepila@uweso.org></a>>
Website:www.uweso.org
We are focussing on meso america and then south america for the
remainder of our work in this arena…then its into go knows what else!
Who knows where our paths will cross eh ?
All the best
Richard
PS there is a newbie out of vermont who is making a mold for Lees
press which makes 2"dia x 4" tall briiquettes. He has a way to go to
simplify it but its interesting none the less. He will be working
with Lee on it I hope.
=======================================================
On Sep 29, 2012, at 6:11 PM, Paul Anderson wrote:
Richard,
10 days ago I finished 2 months on the road to 5 events on 3
continents. Happy to be home for a while. Next trip will probably
be back to Uganda in early November for about 3 weeks. I am setting
up a company there to make TLUD gasifier stoves. Current design is
the "Quad" that you can read about at <a class="moz-txt-link-abbreviated" href="http://www.drtlud.com">www.drtlud.com</a> Aim is to be
able to make over 1000 per month in one location and ship flat pieces
to be assembled near the market. Then to have multiples of that
operation at different sites. I need about 10 to 12 such sites to
make 100,000 stoves per year, which is a magic number for getting
outside support. All of that is needed in Uganda, and more. But I
hope to expand the same methods into other African countries.
FUELS are a major concern, and my little company is also a fuels
company. Briquettes will be very useful. We are able to make the
Lee Hite style of smaller press in Uganda for about $40 each. What
is your opinion of the Hite press called Easy BioPress (free plans on
the Internet).
Any opportunities that arise for any work together, I am interested.
Paul
Paul S. Anderson, PhD aka "Dr TLUD"
<a class="moz-txt-link-abbreviated" href="mailto:Email:psanders@ilstu.edu">Email:psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website:www.drtlud.com
On 9/29/2012 10:31 AM, Richard Stanley wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Dr TLUD,
May I suggest that it NEEDS to cross your mind --and or those of the
folks who created it! Am a fan of hte old MArshal Mcluen: The medium
is the message and all that…
Right we are heavy into guatemal this year briques ar exploding on
the scene but I have no real hard idea as to whether they ar doing
so under force of donor largess or real market demand…Will find all
that out in November when we return to do the TOT of the producers
who are actually selling them and who are demonstrating an adaptive
skills, and whom are sufficiently numerally literate and articulate
to train others. Training goes on in three languages (excluding
english).
What are your own movements, asked from a non proctologist..
Richard
On Sep 29, 2012, at 6:46 AM, Paul Anderson wrote:
Richard,
I think you refer to "Black Revolution" in the context of biochar.
Char is always black and there is no racial connotation
whatsoever. Never crossed my mind about any link to Black people.
BTW, how are you doing? Major activity in Guatemala, right?
Paul
Paul S. Anderson, PhD aka "Dr TLUD"
<a class="moz-txt-link-abbreviated" href="mailto:Email:psanders@ilstu.edu">Email:psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website:www.drtlud.com
On 9/28/2012 11:32 PM, Richard Stanley wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Paul,
I have a hard time getting beyond the title "Black revolution" for
whatever product in Kenya. Did it originate with a Kenyan or an
expat..Does that not bother you too?
Have you heard of the new stove for the US part of the americas,
called "Whites cooking" ? or how about yellow mans briquettes for
China ?
Richard Stanley
On Sep 28, 2012, at 5:42 PM, Paul Anderson wrote:
Tom and all,
Go to <a class="moz-txt-link-abbreviated" href="http://www.re-char.com">www.re-char.com</a> and see the "climate kiln" that sells for
$290 . I know that the design as it is made in Kenya has been
changed from what is shown at the website.
Paul
Paul S. Anderson, PhD aka "Dr TLUD"
<a class="moz-txt-link-abbreviated" href="mailto:Email:psanders@ilstu.edu">Email:psanders@ilstu.edu</a> Skype: paultlud Phone: +1-309-452-7072
Website:www.drtlud.com
On 9/28/2012 1:12 PM, Tom Miles wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Am often asked if there is a burn barrel sized TLUD that is
commercially fabricated. We’ve seen some great DIY with Doug’s
Jolly Roger and others. Is anyone fabricating a 55 gal drum sized
TLUD that can be used for regular biochar production? If so, what
is the cost and availability?
Thanks
Tom Miles
_______________________________________________
Stoves mailing list
to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a>
to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>
for more Biomass Cooking Stoves, News and Information see our web
site:
<a class="moz-txt-link-freetext" href="http://www.bioenergylists.org/">http://www.bioenergylists.org/</a>
</pre>
</blockquote>
<pre wrap="">_______________________________________________
Stoves mailing list
to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a>
<a class="moz-txt-link-rfc2396E" href="mailto:stoves@lists.bioenergylists.org"><mailto:stoves@lists.bioenergylists.org></a>
to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>
for more Biomass Cooking Stoves, News and Information see our web
site:
<a class="moz-txt-link-freetext" href="http://www.bioenergylists.org/">http://www.bioenergylists.org/</a>
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<br>
</body>
</html>