I think that Jim Jetter used a bomb calorimeter in his TLUD tests.<div><br></div><div>Dean<br><br><div class="gmail_quote">On Sun, Nov 4, 2012 at 2:59 AM, Crispin Pemberton-Pigott <span dir="ltr"><<a href="mailto:crispinpigott@gmail.com" target="_blank">crispinpigott@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Dear Paul<br>
<br>
>What is important is<br>
> the quality of the control of the amount of primary air that can<br>
> enter.   VERY  WELL DONE.<br>
<br>
The stove is quite airtight on the controllers.<br>
<br>
On another related topic for TLUD's:<br>
<br>
Have you decided on a favourite value for the heat of combustion from the<br>
gases developed from a wood fire in the TLUD's? If you have a wood at 18.4<br>
MJ/kg dry and you have (say) 20% char left at the end, what would you<br>
consider the heat value per missing kg? Obviously it is not the same as the<br>
initial wood.<br>
<br>
So I wanted to explore this with you. Let's set the moisture at 15% to be<br>
typical of air-dried hot-country fuel wood.<br>
<br>
Starting with an LHV for the dry wood, the net heat LHV is 15.25 MJ/kg. If<br>
there is 200 g of char remaining, and we treat it as being the same as<br>
regular hardwood charcoal, we can assign a heat value of 29.5 * 0.2 = 5.9 MJ<br>
for the remaining char.<br>
<br>
What remains as heat available is 9.35 MJ. This is from 800 g of missing<br>
fuel so the energy average per missing gram is 9.35/0.8 = 11.69 MK/kg or<br>
11.69 Joules per gram.<br>
<br>
Do you agree with this approach?<br>
<br>
What it means is that if you put a char-making stove on a scale and run it<br>
you have a value of heat per g missing from the scale. The missing mass is<br>
moisture, wood gas and some of the carbon (about 1/2).<br>
<br>
Using this approach you can determine the net thermal efficiency of the<br>
flame-to-pot+water. As the amount of char remaining is variable and not<br>
known until after the test is completed, it is hard to know what the<br>
performance is during the test but that is a detail.<br>
<br>
You can determine if the thermal efficiency has been improved should you<br>
make changes to the stove body.<br>
<br>
For those who like details, the heat value of the char is usually unknown.<br>
It would have to be homogenised and a sample tested in a bomb calorimeter to<br>
know what it is exactly.  As Penn Taylor pointed out, the value can range<br>
from about 12 to 33 MJ/kg so the real value is going to vary from test to<br>
test.<br>
<br>
Regards<br>
Crispin<br>
<br>
<br>
<br>
_______________________________________________<br>
Stoves mailing list<br>
<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br>
<br>
for more Biomass Cooking Stoves,  News and Information see our web site:<br>
<a href="http://www.bioenergylists.org/" target="_blank">http://www.bioenergylists.org/</a><br>
<br>
</blockquote></div><br></div>