Dear Lanny,<div><br></div><div>Hope you get better soon!</div><div><br></div><div>Here are the design principles I use to tune a stove (same for Rocket, TLUD, Fan stoves).</div><div><br></div><div>I imagine that to get clean combustion all of the gases and smoke are forced to enter the flame.</div>
<div><br></div><div>Then the gases and smoke stay in the flame long enough to be burned up.</div><div><br></div><div>The very hot yellow/white flames easily make black carbon.</div><div><br></div><div>The less hot deeper yellow/red flames make less/no black carbon.</div>
<div><br></div><div>Draft is decreased or increased until the right amount of gas and smoke is delivered to the flame for the right amount of time.</div><div><br></div><div>Draft has a lot to do with the correct metering of fuel (gas and smoke) into the flame: how fast gas and smoke is made and how much flame is made. I think we want lots of flame but only the right metered amount of gas and flame to enter the flame. </div>
<div><br></div><div>Lengthening the time for combustion in the flame is good when: the metering of fuel stays right,  the air/fuel ratio stays right, and losses through the stove body do not increase too much (good insulation.)</div>
<div><br></div><div>Flame is needed to combust smoke and gas.</div><div><br></div><div>Something like that.</div><div><br></div><div>Best,</div><div><br></div><div>Dean</div><div><br></div><div><br><br><div class="gmail_quote">
On Sun, Apr 14, 2013 at 11:25 AM, Alex English <span dir="ltr"><<a href="mailto:english@kingston.net" target="_blank">english@kingston.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

  
    
  
  <div text="#000000" bgcolor="#FFFFFF">
    <div>Lanny,<br>
      I understand the comment below but I think flame height can be
      shortened with excessive excess air. The lowest emissions CO/CO2
      and highest temperatures, at some power levels, in appliances that
      I have tested has often been when there is a significantly taller
      tail of flame. <br>
      <br>
      However, don't believe  all tall tails :)<br>
      Alex<br>
      <br>
      On 14/04/2013 1:51 PM, Lanny Henson wrote:<br>
    </div>
    <blockquote type="cite">
      
      
      <br>
    </blockquote>
    <span style="FONT-SIZE:18pt"><font face="Calibri">The combustion air needs to be focused on the
        combustion zone in a way that shortens the flame height. More
        like the way a TLUD with a fan works. </font></span>
  </div>

<br>_______________________________________________<br>
Stoves mailing list<br>
<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br>
<br>
for more Biomass Cooking Stoves,  News and Information see our web site:<br>
<a href="http://stoves.bioenergylists.org/" target="_blank">http://stoves.bioenergylists.org/</a><br>
<br>
<br></blockquote></div><br></div>