<div dir="ltr"><div><div><div><div><div>AJH,<br><br></div>I tried many times to light rice hulls with kerosene. <br>This does not work very well in conjunction with updrafting air.<br></div><div>The kerosene fumes generated in this lighting process stink quite a bit.<br>
<br><div>I also tried to light rice hulls with a gas-jet flame.<br></div>This does not work at all.<br></div><div><br></div>So I tried cardboard.<br>When cardboard burns above the rice hulls, it initially emits a lot of smoke.<br>
After a while, it turns to a sort of charcoal and emits radiant energy.<br></div>As soon as the cardboard turns red, the rice hulls ignite.<br></div>When the rice hulls ignite and burn, they emit no visible smoke.<br><br>
</div><div>All of the smoke in the lighting of the gasifier comes from that initial burning of cardboard.<br></div><div>So if we had a device that only generated radiant energy, this should be ideal for lighting rice hulls.<br>
<br></div><div>The same logic applies to pelleted rice hulls.<br></div><div>They light easily as soon as the cardboard turns red.<br></div><div>I assume that the same logic would apply to pellets made from other types of biomass.<br>
</div><div>Perhaps this assumption is wrong.<br><br></div><div><br></div><div>Thanks.<br></div><div>Paul<br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><div><div><br></div></div></div></div><div class="gmail_extra">
<br><br><div class="gmail_quote">On Sun, May 12, 2013 at 4:32 PM,  <span dir="ltr"><<a href="mailto:ajheggie@gmail.com" target="_blank">ajheggie@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
[Default] On Sun, 12 May 2013 10:57:02 +0700,Paul Olivier<br>
<div class="im"><<a href="mailto:paul.olivier@esrla.com">paul.olivier@esrla.com</a>> wrote:<br>
<br>
>An electrical coil producing infrared heat would be used to light the pellets. The lighting would take place in less than 20 seconds and would generate very little smoke.<br>
<br>
<br>
</div>I like the idea of a more sophisticated tlud burner for open flame<br>
cooking and I have previously mentioned that with modern electronics<br>
we could develop a proper mechanism for controlling draught and power,<br>
like the ECU on a car does.<br>
<br>
My experience of electric hot air lighters is that the few seconds<br>
that they pyrolyse the wood before it gets above it's autoignition<br>
temperature copious acrid smoke is produced. Using kerosene as a<br>
starter with a match is faster at getting smoke free.<br>
<br>
AJH<br>
<div class="HOEnZb"><div class="h5"><br>
_______________________________________________<br>
Stoves mailing list<br>
<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br>
<br>
for more Biomass Cooking Stoves,  News and Information see our web site:<br>
<a href="http://stoves.bioenergylists.org/" target="_blank">http://stoves.bioenergylists.org/</a><br>
<br>
</div></div></blockquote></div><br><br clear="all"><br>-- <br>Paul A. Olivier PhD<br>26/5 Phu Dong Thien Vuong<br>Dalat<br>Vietnam<br>
<br>Louisiana telephone: 1-337-447-4124 (rings Vietnam)<br>Mobile: 090-694-1573 (in Vietnam)<br>Skype address: Xpolivier<br><a href="http://www.esrla.com/" target="_blank">http://www.esrla.com/</a>
</div>