<div dir="ltr"><div><div><div><div>Paal,<br><br></div>One thing I look for on my burner is that all burner holes support a flame throughout the process. If channeling occurs during the process or if char is being burned as the process comes to a close, then one can see burner holes that do not support a flame. This means that CO2 is being discharged from the burner holes, and of course CO2 does not burn. When CO2 is formed, this represents a big inefficiency, since combustion takes place far below the pot. When this happens the sides of the reactor can easily turn red hot and melt. I do not know how it is possible to spot the presence of CO2 if the top of the reactor stays open and does not have a lid with burner holes.<br>
<br></div>If one turns up the fan a bit too high resulting in channeling, it can happen that only a few holes (among a total of 80 in my case) do not support a flame. If I turn the fan down a bit and shake the reactor, this problem is immediately corrected. Also the effect of the presence of CO2 can be spotted by the cook in another way. The distribution of heat to the pan is not even.<br>
<br></div><div>Also many of the positive characteristics of biochar are lost when biochar is combusted and is reduced to ash. The combustion of biomass and biochar takes place when channeling occurs, and the combustion of biochar takes place if the fan is not turned off at the end of the process. Rice hull ash and rice hill biochar are not at all the same thing when it comes to growing plants. Also rice hull ash can easily contain cristobalite, which is a nasty carcinogen. Under ordinary conditions, no farmer should be handling this stuff.<br>
</div><div><br></div>Thanks.<br></div>Paul<br><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Jun 12, 2013 at 1:06 PM, Paal Wendelbo <span dir="ltr"><<a href="mailto:paaw@online.no" target="_blank">paaw@online.no</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div dir="ltr">
<div style="font-size:12pt;font-family:'Calibri'">
<p class="MsoNormal" style="MARGIN:0cm 0cm 10pt;LINE-HEIGHT:13pt"><span lang="EN-US"><font style="FONT-SIZE:11pt">Ron</font></span></p>
<p class="MsoNormal" style="MARGIN:0cm 0cm 10pt;LINE-HEIGHT:13pt"><span lang="EN-US"><font style="FONT-SIZE:11pt">By end of flame the color of the char 
is red to yellow, that indicate a temperature of 700 to 800 ˚C and when there is 
no smoke, complete combustion has taken place. Is that not good for 
biochar?</font></span></p>
<p class="MsoNormal" style="MARGIN:0cm 0cm 10pt;LINE-HEIGHT:13pt"><span lang="EN-US"><font style="FONT-SIZE:11pt">Regards Paal 
W</font></span></p></div></div></div>
<br>_______________________________________________<br>
Stoves mailing list<br>
<br>
to Send a Message to the list, use the email address<br>
<a href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a><br>
<br>
to UNSUBSCRIBE or Change your List Settings use the web page<br>
<a href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" target="_blank">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br>
<br>
for more Biomass Cooking Stoves,  News and Information see our web site:<br>
<a href="http://stoves.bioenergylists.org/" target="_blank">http://stoves.bioenergylists.org/</a><br>
<br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Paul A. Olivier PhD<br>26/5 Phu Dong Thien Vuong<br>Dalat<br>Vietnam<br>
<br>Louisiana telephone: 1-337-447-4124 (rings Vietnam)<br>Mobile: 090-694-1573 (in Vietnam)<br>Skype address: Xpolivier<br><a href="http://www.esrla.com/" target="_blank">http://www.esrla.com/</a>
</div></div>