<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:12pt"><div><span>Aprovecho give us a test training a month ago in Antigua Guatemala, you shoul ask Michael Irvine for this results, but in the other hand a few topics you should consider</span></div><ul><li><span>tipe of Wood</span></li><li><span>number of family member that live in the same house using the same stove</span></li><li><span>childrens under 10 eat less</span></li><li><span class="hps">cultural</span> <span class="hps">habits (ea. in some áreas of Guatemala people use more Wood to keep the house warm, than only for preparing food)</span></li><li><span class="hps"><span class="hps">the of wood use</span> <span class="hps">changes</span> <span class="hps">in</span> <span class="hps">the dry season and</span> <span class="hps">rainy season,</span></span></li></ul><div><span class="hps"><span class="hps">at this
momento we are monitoring use of Wood in rainy season in El Salvador will do survey in 130 families, if you think this can a usefull report I can send it to bioenergy list, Guatemala, Honduras and San Miguel de Allende in México will do the same in 2 months.</span></span></div><div><span class="hps"><span class="hps"></span></span> </div><div><span class="hps"><span class="hps">Best Regards</span></span></div><div><span class="hps"><span class="hps"></span></span> </div><div><span class="hps"><span class="hps">Gus</span></span></div><div><br></div> <div style="font-family: times new roman, new york, times, serif; font-size: 12pt;"> <div style="font-family: times new roman, new york, times, serif; font-size: 12pt;"> <div dir="ltr"> <div class="hr" style="margin: 5px 0px; padding: 0px; border: 1px solid rgb(204, 204, 204); height: 0px; line-height: 0; font-size: 0px;" contenteditable="false" readonly="true"></div> <font face="Arial"
size="2"> <b><span style="font-weight: bold;">From:</span></b> Frank Shields <frank@compostlab.com><br> <b><span style="font-weight: bold;">To:</span></b> 'Discussion of biomass cooking stoves' <stoves@lists.bioenergylists.org> <br> <b><span style="font-weight: bold;">Sent:</span></b> Friday, September 6, 2013 9:21 PM<br> <b><span style="font-weight: bold;">Subject:</span></b> [Stoves] entire end to end value system<br> </font> </div> <div class="y_msg_container"><br><div id="yiv2452996098"><style><!--
#yiv2452996098
_filtered #yiv2452996098 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;}
_filtered #yiv2452996098 {font-family:SimSun;panose-1:2 1 6 0 3 1 1 1 1 1;}
_filtered #yiv2452996098 {font-family:SimSun;panose-1:2 1 6 0 3 1 1 1 1 1;}
_filtered #yiv2452996098 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}
_filtered #yiv2452996098 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;}
_filtered #yiv2452996098 {font-family:"MS UI Gothic";panose-1:2 11 6 0 7 2 5 8 2 4;}
_filtered #yiv2452996098 {panose-1:2 11 6 0 7 2 5 8 2 4;}
_filtered #yiv2452996098 {panose-1:2 1 6 0 3 1 1 1 1 1;}
#yiv2452996098
#yiv2452996098 p.yiv2452996098MsoNormal, #yiv2452996098 li.yiv2452996098MsoNormal, #yiv2452996098 div.yiv2452996098MsoNormal
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:"Times New Roman", "serif";}
#yiv2452996098 a:link, #yiv2452996098 span.yiv2452996098MsoHyperlink
{color:blue;text-decoration:underline;}
#yiv2452996098 a:visited, #yiv2452996098 span.yiv2452996098MsoHyperlinkFollowed
{color:purple;text-decoration:underline;}
#yiv2452996098 p
{margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:"Times New Roman", "serif";}
#yiv2452996098 p.yiv2452996098MsoAcetate, #yiv2452996098 li.yiv2452996098MsoAcetate, #yiv2452996098 div.yiv2452996098MsoAcetate
{margin:0in;margin-bottom:.0001pt;font-size:9.0pt;font-family:"Times New Roman", "serif";}
#yiv2452996098 p.yiv2452996098MsoListParagraph, #yiv2452996098 li.yiv2452996098MsoListParagraph, #yiv2452996098 div.yiv2452996098MsoListParagraph
{margin-top:0in;margin-right:0in;margin-bottom:0in;margin-left:.5in;margin-bottom:.0001pt;font-size:12.0pt;font-family:"Times New Roman", "serif";}
#yiv2452996098 span.yiv2452996098BalloonTextChar
{font-family:"Tahoma", "sans-serif";}
#yiv2452996098 span.yiv2452996098apple-converted-space
{}
#yiv2452996098 span.yiv2452996098EmailStyle21
{font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv2452996098 span.yiv2452996098EmailStyle22
{font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv2452996098 span.yiv2452996098EmailStyle23
{font-family:"Calibri", "sans-serif";color:#1F497D;}
#yiv2452996098 p.yiv2452996098a, #yiv2452996098 li.yiv2452996098a, #yiv2452996098 div.yiv2452996098a
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:"Times New Roman", "serif";}
#yiv2452996098 span.yiv2452996098Char
{font-family:SimSun;}
#yiv2452996098 span.yiv2452996098EmailStyle26
{font-family:"Calibri", "sans-serif";color:#993366;font-weight:bold;}
#yiv2452996098 .yiv2452996098MsoChpDefault
{font-size:10.0pt;}
_filtered #yiv2452996098 {margin:1.0in 1.0in 1.0in 1.0in;}
#yiv2452996098 div.yiv2452996098WordSection1
{}
#yiv2452996098
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
_filtered #yiv2452996098 {}
#yiv2452996098 ol
{margin-bottom:0in;}
#yiv2452996098 ul
{margin-bottom:0in;}
--></style><div><div class="yiv2452996098WordSection1"><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Dear Jock, (subject changed) and stovers,</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Jock – a great suggestion to use the entire value chain. </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>There is a layered system and a unit system and we seem to bounce from one to the other. The layered system goes like this:</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102);
font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'><span>1)<span style='font: 7pt/normal "Times New Roman"; font-size-adjust: none; font-stretch: normal;'> </span></span></span></b><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>How much forest does a village use per year? To reduce this we need to know….</span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'><span>2)<span style='font: 7pt/normal "Times New Roman"; font-size-adjust: none; font-stretch: normal;'> </span></span></span></b><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>How much does
each household use (equals sum). To reduce this we need to know the difference in use for the ones using more and the ones using less. </span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'><span>3)<span style='font: 7pt/normal "Times New Roman"; font-size-adjust: none; font-stretch: normal;'> </span></span></span></b><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Of this list (leave doors open, pre-dry wood, stove types, cooking more of a type of food …. , to reduce we need to zero in on each and optimize the process. Lets take stoves.</span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'><span>4)<span style='font: 7pt/normal "Times New Roman"; font-size-adjust: none;
font-stretch: normal;'> </span></span></span></b><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>For stove efficiency we need only two numbers; a) wood used per b) task completed. We convert ‘wood’ to energy units’ for calculating purposes.</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>To go deeper…</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>The purpose of
the stove testing is to <u>compare and improve stoves</u> to optimize that part of the energy value chain. Not to do real energy calculations because with all the variables that is impossible. <u></u></span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'><span>1)<span style='font: 7pt/normal "Times New Roman"; font-size-adjust: none; font-stretch: normal;'> </span></span></span></b><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Wood Energy used: We deal with little hot boxes for a short time where everything changes in seconds. To use the least variables and simplest means the HHV is all we need on a dry
weight basis. A calorimeter or ‘look-up’ is used for the HHV and moisture for dry weight. Using the LHV means we need to add hydrogen (another test variable) and not needed for the purpose of comparing stoves. We need to subtract the energy left over from the total starting to get what was used. The simplest means I know of is using the volatile fraction (pipe method). We need a new word because it is not the ‘total starting energy’. Say ‘fraction of the total energy’ (FTV) used. This gives us FTV energy efficiency values (FTVEV). We can add to this stipulations like also; a) safe stove-must not tip over b) low particulate matter c) easy to use d) burns local fuel etc. etc. But these are added requirements and not included in efficiency calculations. </span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>
</span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'><span>2)<span style='font: 7pt/normal "Times New Roman"; font-size-adjust: none; font-stretch: normal;'> </span></span></span></b><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Task Completed – depending on what it is. </span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>The way I look at it…</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>
</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Thanks</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'>Frank</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>Frank Shields</span></b></div><div
class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>Control Laboratories; Inc.</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>42 Hangar Way</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>Watsonville, CA 95076</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>(831) 724-5422 tel</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>(831) 724-3188 fax</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>frank@biocharlab.com</span></b></div><div class="yiv2452996098MsoNormal"><b><span
style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif";'>www.controllabs.com</span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoListParagraph"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color:
rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102); font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div class="yiv2452996098MsoNormal"><b><span style='color: rgb(153, 51, 102);
font-family: "Calibri", "sans-serif"; font-size: 14pt;'> </span></b></div><div><div style="border-width: 1pt medium medium; border-style: solid none none; border-color: rgb(181, 196, 223) currentColor currentColor; padding: 3pt 0in 0in;"><div class="yiv2452996098MsoNormal"><b><span style='font-family: "Tahoma", "sans-serif"; font-size: 10pt;'>From:</span></b><span style='font-family: "Tahoma", "sans-serif"; font-size: 10pt;'> Stoves [mailto:stoves-bounces@lists.bioenergylists.org] <b>On Behalf Of </b>Jock Gill<br><b>Sent:</b> Tuesday, September 03, 2013 8:54 AM<br><b>To:</b> Discussion of biomass cooking stoves<br><b>Subject:</b> Re: [Stoves] </span><span style='font-family: "MS UI Gothic", "sans-serif"; font-size: 10pt;'>答复</span><span style='font-family: "Tahoma", "sans-serif"; font-size: 10pt;'>: A wisdom of Rebecca's stove</span></div></div></div><div class="yiv2452996098MsoNormal"> </div><div><div class="yiv2452996098MsoNormal">It
would be appropriate to take a whole systems, end-to-end, value chain analysis.</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">If a stove makes useful charcoal that increases crop yield and quality, or increases animal protein production, that might also move a farmer from just a consumer to also a producer, how to we value that as part of our analysis of the "value" of a stove? What, for example, is the value of the end product of combustion?</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">Simply looking at energy in and out, or stack gases, or water boiling times, gives a very incomplete picture of the total value chain a particular stove/technology creates/sustains.</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">I suggest that it is important to look at
the entire value chain, not just selected parts.</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">Cheers,</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">Jock</div></div><div><div class="yiv2452996098MsoNormal"> </div><div><div class="yiv2452996098MsoNormal">Jock Gill</div></div><div><div class="yiv2452996098MsoNormal">P.O. Box 3</div></div><div><div class="yiv2452996098MsoNormal">Peacham, VT 05862</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">Cell: (617) 449-8111</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div><div class="yiv2452996098MsoNormal">:> Extract CO2 from the atmosphere! <:</div></div><div><div class="yiv2452996098MsoNormal"> </div></div><div class="yiv2452996098MsoNormal">Sent from my
iPad</div></div><div><div class="yiv2452996098MsoNormal" style="margin-bottom: 12pt;"><br>On Sep 2, 2013, at 11:07 PM, "DONG Renjie (Randdy)" <<a href="mailto:rjdong@cau.edu.cn" target="_blank" rel="nofollow" ymailto="mailto:rjdong@cau.edu.cn">rjdong@cau.edu.cn</a>> wrote:</div></div><blockquote style="margin-top: 5pt; margin-bottom: 5pt;"><div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'>An interesting discussion about the leftover’s impact on the test results. It would be hard to separate the leftover into charcoal, unburned, and un-used. However we can burn all the fuel in the stove and we monitor the water.</span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'>And according to the reality of cooking, the heat is used to increase the cooked things temperature up to the
boiling point and hold for a certain time. Then the temperature is acceptably declining although the fire is still there (also declining). The heat could be treated as no-use heat but it is necessary to be included in the “all heat in the fuel”.</span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'>This is approximately represented by a standard in China, DB 11.</span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'> </span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'>I have a feeling that there would be some shortages associated with each standard and protocol, but it is the time for us to borrow all advantages to build an upgraded unique standard and a box of protocols (tool
box as Crispin mentioned before).</span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'> </span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'>Randdy</span></div><div class="yiv2452996098MsoNormal"><span style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 10.5pt;'> </span></div><div><div style="border-width: 1pt medium medium; border-style: solid none none; border-color: rgb(181, 196, 223) currentColor currentColor; padding: 3pt 0in 0in;"><div class="yiv2452996098MsoNormal"><b><span style="font-family: SimSun; font-size: 10pt;">发件人:</span></b><span style="font-family: SimSun; font-size: 10pt;"> Crispin Pemberton-Pigott [<a href="mailto:crispinpigott@gmail.com" target="_blank" rel="nofollow"
ymailto="mailto:crispinpigott@gmail.com">mailto:crispinpigott@gmail.com</a>] <br><b>发送时间:</b> 2013年9月3日 3:37<br><b>收件人:</b> 'Discussion of biomass cooking stoves'<br><b>主题:</b> RE: [Stoves] A wisdom of Rebecca's stove</span></div></div></div><div class="yiv2452996098MsoNormal"> </div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Dear Rebecca</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>I can’t respond in detail at the moment to the other questions but there is an important element of your test reporting that should be reconsidered. What follows is in line with
the current thinking about how to treat leftover fuel and how to report ‘efficiency’.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>This is from your document:</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">RESULTS:</span></b></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">TIME TO BOIL: 41 minutes</span></b></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">WEIGHT OF FIREWOOD USED: 1.75kg (3.00 – 0.10kg unburned wood – 1.00kg unused wood – 0.15kg
charcoal)</span></b></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>There are two things of interest to the stovers: the heat transfer efficiency and the fuel consumption. It is important to keep in mind these are not the same thing and one does not translate into the other. Jim Jetter in his webinar mentioned this last week. The implications are significant. Jim and I and many others have discussed this for a while and we are settling on some clarifying remarks, you could say, about these two metrics.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div
class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>People building stoves want to know if the heat transfer efficiency has changed, and there are standard engineering methods to work it out. The popular WBT does are reasonable though not completely accurate calculation of the heat transfer efficiency. It is not necessary in this message to go through that in detail, but it is important to understand that the WBT calculates the heat transfer efficiency, not the fuel consumption. Your method falls somewhere in between.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The WBT does this by working out
how much heat was available from the fuel, though does not include in that calculation the loss of energy from unburned particles and gases. The quantity of energy available from the fuel is compensated for moisture and the remaining charcoal which is given an arbitrary or measured heat value. This (theoretical) energy yielded total is expressed in Joules.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The energy in Joules is then divided by the heat energy available in the raw fuel were it to have been dried completely. It is called the ‘dry fuel equivalent’. It really is the dry fuel equivalent, no doubt about it, but it is not the dry fuel that was consumed. It is the dry fuel
equivalent of the energy that was calculated to have been available, and that is used to determine the heat transfer efficiency (or a reasonable proxy of it).</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>As for the fuel efficiency, one can report the fuel consumption. Your list above (which is a very good way to present the information, by the way) has this:</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">WEIGHT OF FIREWOOD USED: </span></b></div><div class="yiv2452996098MsoNormal"><b><span
lang="EN-CA">3.00 minus 0.10kg unburned wood minus 1.00kg unused wood minus 0.15kg charcoal = 1.75kg wood consumed</span></b></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>This means you are trying to calculate the mass of fuel consumed when performing the test, in this case a water boiling test. The consumption of fuel can be taken to mean the mass of new fuel that you need each time the test is ‘replicated’. The reason this is different from the dry mass equivalent of the energy used to calculate the heat transfer efficiency is that there is always some wasted fuel from burn cycle to burn cycle. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA"
style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>‘Wasted’ is not a term of criticism, it is used to mean ‘not used’ and is a ‘loss’. Losses classically are divided into ‘chemical losses’ (in the form of un-oxidized gases) and ‘mechanical losses’, meaning unburned fuel that falls to the ground from a conveyor, so partially burned fuel in the ash and char remaining is in the latter category of mechanical losses.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The question
that arises, as highlighted by Jim, is whether or not the fuel can be burned in the same stove during the next replication. If it can, then it is unburned fuel that will go to the next round and could therefore be deducted from ‘fuel consumed’. If not, then it falls into the category of ‘mechanical losses’ and has been ‘consumed’. That means for fuel consumption purposes it should not be deducted from the mass of fuel consumed per replication.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>I have been working on a new method of determining the fuel consumption in a realistic setting, though still using a lab test. I discussed this with Jim some time ago though it was not
presented as a separate method last week. It will be used in the upcoming round of testing in Indonesia’s CSI Pilot so some stovers will get to see what the influence is on their claimed fuel consumption rates. I am hoping your stoves will be included in that testing. The intention is to get a more accurate consumption figure.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The method is to ask the manufacturer what fuel from a previous cycle can be used in the next one. This claim is tested. The reusable fuel remaining is then included in the following replication, meaning the tests do not start off with new raw fuel each time and end with having some partially burned wood and
char. Tests are started with old fuel in the mix. If that leftover fuel is ‘fuel’ for that particular stove, it goes into the next replication as part of the fuel to be consumed and the raw fuel that has to be added is monitored separately. When that second replication ends, there will again be some unused/unburned/partially burned fuel left over. That becomes part of the fuel for the third burn. And so on. The point is to determine how much additional raw fuel has to be added per replication so three are performed in a row with the old fuel going into the next round (if it can burn it). The calculation of the raw fuel consumed is surprisingly easy. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif";
font-size: 11pt;'>Perform a burn cycle first, then using the leftovers, perform three more and divide the raw fuel needed to do all of them by three. It is quite accurate and represents use in the field. It also avoids trying to judge the fuel remaining from each test individually and having as a final answer, the sum of all the errors. This new method divides the errors by three. If a stove can’t use any of the fuel remaining, there is no error at all. What is consumed is what went in, 100%.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">WEIGHT OF FIREWOOD USED: </span></b></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">3.00 </span></b><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size:
11pt;'>= wood set aside to burn</span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">0.10kg unburned wood </span></b><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>= wood that is still in its original form</span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">1.00kg unused wood </span></b><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>= partially burned but left over? If it is ‘processed’ in some manner, meaning dried out, partially charred and so on, obviously it has a different heat content. That matters, and it is hard to check.</span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">0.15kg charcoal </span></b><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>= some dry fuel equivalent, or some moist fuel equivalent, or
some number of Joules. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>If those ‘remainders’ can or cannot be used as fuel in the next fire (or is unlikely to be used in the target community) then the formula for mass of wood consumed must be changed to reflect reality.</span></div><div class="yiv2452996098MsoNormal"><b><span lang="EN-CA">= 1.75kg wood consumed </span></b><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>= not really. It depends.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div
class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Well, this kinda highlights my beef. The 1.75 value is not necessarily the same as the wood consumed, and if it was, it would (according to the WBT) be the mass of dry wood that is equivalent to the energy that was theoretically available to be released, based on the mass of fuel burned, factored for the As Received heat content and the energy in the charcoal remaining (which may or may not have been determined correctly).</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The first step to cleaning up this calculation is to ask if the fuel remaining can be
used in the next replication. If it cannot, it is consumed and you do not subtract it from the total. You also don’t have to test it.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Let’s assume the charcoal cannot be burned (based on the stove’s construction) but the ‘burned wood’ remaining can. We do not know the heat content of that burned wood, but per kg it will be quite a bit higher than the original moist fuel. Because nearly none of us have the ability to check on its heat content per kg, we should have started the test using such fuel left over from a previous test to cancel the error. That way the errors at the beginning and end will reasonably offset each other. As it
is, the heat energy in the fuel remaining is ‘higher than the formula thinks’ which means the performance is under-reported.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>If the char remaining is 1.6 times the dry fuel heat value, then the fuel mass equivalent is 0.15 x 1.6 = 0.24 kg of fuel that should not be deducted. I think you are using the moist fuel mass for the 3 kg so it is not exactly a WBT method. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family:
"Calibri", "sans-serif"; font-size: 11pt;'>If the unused fuel <i>can</i> be deducted, the partially burned fuel can (because we can’t go back to change the way the test was done) we end up with:</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>3.0 – 0.1 – 1.0 = 1.9 moist fuel kg consumed. To know the dry fuel equivalent we would have to know the moisture content and the dry fuel mass equivalents for each element of the formula.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125);
font-family: "Calibri", "sans-serif"; font-size: 11pt;'>If the stove can burn the charcoal in the next round, then one could legitimately deduct (0.15 x 1.6 = 0.24) kg from the dry fuel mass burned of those masses are in ‘dry fuel’ values. If the numbers are all for moist fuel, then a different conversion would be required because char is dry, the partially burned wood is drier and the unused wood is moist. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>In short, try starting the stove with the fuel remaining from a previous test, and record the mass and condition. Try to do identical tests in a series so you can take them as a group. The new fuel you have to add each test is the
consumption. Leave out the difficult and inaccurate estimates of the heat content of processed fuels. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The end result will be a much accurate assessment and in your case, slightly better performance once the charcoal question is addressed. For any stove that can burn all fuel remaining, the current methods under-report the system efficiency and over-report the fuel consumption. For stoves that cannot burn any of the fuel remaining, the current methods over-report the system efficiency and under-report the fuel consumption. It is because of this that we are implementing a completely new approach to the determination of fuel
consumption. </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The heat transfer efficiency question is also being ‘spruced up’.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Regards</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Crispin</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA"
style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div><div style="border-width: 1pt medium medium; border-style: solid none none; border-color: rgb(225, 225, 225) currentColor currentColor; padding: 3pt 0in 0in;"><div class="yiv2452996098MsoNormal" style="margin-bottom: 12pt;"><b><span style='font-family: "Calibri", "sans-serif"; font-size: 11pt;'>From:</span></b><span style='font-family: "Calibri", "sans-serif"; font-size: 11pt;'> reb-kees [<a href="mailto:ravermeer@telus.net" target="_blank" rel="nofollow" ymailto="mailto:ravermeer@telus.net">mailto:ravermeer@telus.net</a>] <br><b>Sent:</b> Monday, September 02, 2013 3:53 AM</span></div></div></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA"> </span></div><div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">Dear Crispin, Larry and All Stovers,</span></div></div><div><div
class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">In the attached trials, I attempted to separate the primary and secondary air flows in the Eco-Kalan -C under the following binding constraints:</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">1. that the Eco-Kalan-C stove remains 100% clay; and </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">2. that any change in the design of the Eco-Kalan-C has little impact on its production methods.</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">I offer 2 methods of introducing the secondary air supply -- through 3 holes in the combustion chamber above the firewood (Trial #2); and through the same sized 3
holes in the Kalan at the height where the fire comes out of the vertical part (chimney) of the combustion chamber (Trial #4). The links will take you to a series of photos of the BURNS and WBT (my version) runs to determine the time it takes to boil 18.75 L of water in a 33L pot and the amount of firewood (star apple) consumed. At Felipa Beach, Philippines, we use this volume of water and size of pot to cook 11 kg of rice for a luncheon of 100 + people.--still being done on a 6-year old Eco-Kalan-C that is insulated with ash. Please take a look at the fires --can you tell if the separation of the primary and secondary airflows is contributing to a reduction in PM and CO? How can I get to boiling faster without increasing the PM and CO?</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div><div class="yiv2452996098MsoNormal"><span
lang="EN-CA" style="color: black;">I also reduced the height of the front opening of the combustion chamber for the 3 variations from the regular insulated Eco-Kalan-C in oder to lessen excess air. Without instruments and expert help, I wont really know how beneficial this modification has been. However, I have observed the following:</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">1. The separation in airflows could not cool down the combustion chamber and the outer Kalan sufficiently to be able to touch it and not get burned. With the insulated Eco-Kalan-C, the Kalan gets hot but wont cause a burn.</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">2. It takes longer to boil the same volume of water with the separated airflow models than with the regular insulated Eco-Kalan-C. I wonder
if this is due to the reduction in the height of the pot supports from 11/16 inch insulated Eco-Kalan-C model to 8-9/16 inch in the separated airflow models.</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">3. The reduction in the height of the front opening of the combustion chamber and the resulting reduction in the size of the opening for the Kalan led to a wider neck around the most vulnerable part of the Kalan. In its present form, the Kalan can hold 43kg of weight when we cook pork & beans using the Eco-Kalan-C. With a wider neck, I expect it to carry a heavier load. Have you seen stoves in Indonesia that can carry and cook the same weight of food & pot or wok?</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">4. It is true what Crispin said about the combustion chamber being
the weakest part of the stove. But in the insulated Eco-Kalan -C model, a cracked combustion chamber can still function effectively due to the insulating ash that holds it together. Proof of that is the reject (cracked during firing) Eco-Kalan -C stove we have used for 6 years in daily and special event cooking at Felipa Beach.</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">5. During the BURN runs (NO POT on the stove), the flames were coming out forcefully, but when the pot was placed on the stove, the fire in Trial 4 had a hard time rising. It seemed that the air flow through the Kalan was keeping the fire down. </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">6. I love the colours of the flames from the separated airflows. Can you tell from the photos if these are hotter
fires than the one produced in the insulated Eco-Kalan-C?</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">I would appreciate very much your comments and suggestions on how to improve the Eco-Kalan-C. Thank you.</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;">Rebecca</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div><div
align="center" class="yiv2452996098MsoNormal" style="text-align: center;"><span lang="EN-CA" style="color: black;"><div class="hr" style="margin: 5px 0px; padding: 0px; border: 1px solid rgb(204, 204, 204); height: 0px; line-height: 0; font-size: 0px;" contenteditable="false" readonly="true"></div></span></div><div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: black; font-family: "Helvetica", "sans-serif";'> </span></div></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>The principle involved is that of putting a good combustor into a supporting frame.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family:
"Calibri", "sans-serif"; font-size: 11pt;'>Viewed dispassionately, most stovers build combustors and place a pot on top. Lots of people do not think of that as a ‘stove’.</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Paul Anderson has been pretty upfront about saying that is what he often avoids. There is a stove and there is a burner in it. In order to test for safety I want to see a tilt test used where the large diameter pots sitting on three tiny supports will fall off (= fail). </span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'> </span></div><div
class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Regards</span></div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style='color: rgb(31, 73, 125); font-family: "Calibri", "sans-serif"; font-size: 11pt;'>Crispin</span></div></div><div><div class="yiv2452996098MsoNormal"><span lang="EN-CA" style="color: black;"> </span></div></div></div></div></blockquote><blockquote style="margin-top: 5pt; margin-bottom: 5pt;"><div><div class="yiv2452996098MsoNormal" style="margin-bottom: 12pt;">_______________________________________________<br>Stoves mailing list<br><br>to Send a Message to the list, use the email address<br><a href="mailto:stoves@lists.bioenergylists.org" target="_blank" rel="nofollow" ymailto="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a><br><br>to UNSUBSCRIBE or Change your List Settings use the web page<br><a
href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" target="_blank" rel="nofollow">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br><br>for more Biomass Cooking Stoves, News and Information see our web site:<br><a href="http://stoves.bioenergylists.org/" target="_blank" rel="nofollow">http://stoves.bioenergylists.org/</a></div></div></blockquote></div></div></div><br>_______________________________________________<br>Stoves mailing list<br><br>to Send a Message to the list, use the email address<br><a href="mailto:stoves@lists.bioenergylists.org" ymailto="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a><br><br>to UNSUBSCRIBE or Change your List Settings use the web page<br><a href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org"
target="_blank">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br><br>for more Biomass Cooking Stoves, News and Information see our web site:<br><a href="http://stoves.bioenergylists.org/" target="_blank">http://stoves.bioenergylists.org/</a><br><br><br><br></div> </div> </div> </div></body></html>