<div dir="ltr">Dear All,<div><br></div><div>It has been observed that the charcoal obtained from a TLUD stove can sometimes be to "activated carbon" grade  -  but not always.</div><div><br></div><div>Iodine nos above 1200 has been observed sometimes  -  but sometimes it can be as low as around 200. Methylene Blue no has been observed as just at around average/moderate values.</div>
<div><br></div><div>Market charcoal generally has iodine no around 200 to 300 and Methylene Blue no at moderate values ( around 150 ).</div><div><br></div><div>It looks like the following conditions have to be satisfied to arrive at the higher grade of charcoal :</div>
<div><br></div><div><br></div><div>1.   The biomass used shouild be perfectly sun-dried.</div><div><br></div><div>2.   The pyrolysis process has to be extended by a couple of minutes ( after the flame drops down )  -  so that all volatiles in the charcoal are "forced out" ( with the high temperature of charcoal burning ) which increases the porosity of charcoal.</div>
<div><br></div><div><br></div><div>"Activated carbon grade" charcoal can be valuable in so many applications  -  including biochar application. I have personally seen that composting happens much faster when good grade TLUD charcoal is used in the process.</div>
<div><br></div><div>I hope this will be taken up as a subject for <b>"intense research"</b> by TLUD stove enthusiasts.</div><div><br></div><div><br></div><div>Regards</div><div><br></div><div>Rajan</div></div>