<div dir="ltr"><div>Hello stovers;</div><div><br></div><div>I took my  Kero-Sun Radiant 10 apart.  There are some photographs of the inner and outer chimneys in the attached pdf.</div><div><br></div><div>The inner chimney as baffles at the bottom and is enclosed, with perforations at the top.</div>
<div><br></div><div>For sport, I put the inner chimney, and then the inner chimney nested in the outer chimney on top of a 7.5 cm diameter natural draft TLUD.  As we might expect, it created resistance to exhaust gas flow, that reduced the secondary uptake, and caused the TLUD to emit a small amount of visible smoke.   I did this in daylight, so I don't know if any of the chimney assembly became red hot.</div>
<div><br></div><div>In order to investigate this properly, I would have to destroy the chimneys by breaking off the baffles, and expanding the diameter of the perforations in the chimney walls --- and I am not prepared to do that.  What is needed is to find a kerosene heater wreckers yard to scavenge bits.</div>
<div><br></div><div>Thus, it is still an open question (for me anyway) if something like the chimneys in kerosene heaters, or a type of catalytic converter, can reduce soot production from natural draft TLUDs.</div><div><br>
</div><div>Cheers,</div><div>Julien</div><div><br></div><div><br></div><div><br>-- <br></div><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div>
</div>