<div dir="ltr"><div>Hi Stovers;</div><div><br></div><div>At the suggestion of Paul Anderson, I ran single tests on the burner with the concentrator below secondary air holes (ConcBelow), and the discontinuous annular (Rectangular) burner.  In these tests I put a 2.5 cm diameter cylinder in the center of the burners to direct flamelets upwards in the chimney.</div>
<div><br></div><div>A pdf is attached.  Photographic conditions were not ideal (nor was my old camera), but good enough to see how the flamelets were affected.</div><div><br></div><div>I can't say if the central cylinder was an improvement, because my soot test was not that sensitive.  However, the central cylinder didn't appear to increase soot production compared to having no cylinder, nor did it slow down the rate of gasification.</div>
<div><br></div><div>Future, more detailed experimentation could include a central cylinder to see if it reduces the mass of soot produces, and increases the rate of heat transfer to the pot.</div><div><br></div><div>Cheers,</div>
<div>Julien.<br clear="all"> <br>-- <br></div><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div>
</div>