<div dir="ltr">Martin,<div><br></div><div><span style="color:rgb(0,0,0);white-space:pre-wrap">Maybe with the low SIT (self-ignition temperature) of charcoal, and using the 6 holes below secondary flame for method 2 in the document proposed by Kirk Harris "Methods of Substantial Turn-down in the TLUD Wood Gas Cook Stove", you can use this procedure to start a TLUD stove, especially with wood pellets:</span><br>
</div><pre style="white-space:pre-wrap;color:rgb(0,0,0)">1. add fuel (pellets) to near the level of the 6 (or more) secondary holes.</pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)">2. then put a thin layer of charcoal (pellet charcoal from previous burns) at the same level of the 6 holes. <span style="font-family:arial"> This charcoal can be soaked with alcohol, for example.</span></pre>
<pre style="white-space:pre-wrap;color:rgb(0,0,0)">3. light the stove with a spark to start the fire, and then the primary air from below plus the primary air from the 6 or more holes do the rest.</pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)">
This remember me an experiments i have made with a TLUD stove with primary air control and a burner type similar to the type named "concbelow" (concentrator ring below secondary holes) by Julien Winter.</pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)">
This TLUD stove can operate to near 2 hours. After 1 hour or less, i closed the primary air control and closed the upper hole of the concentrator ring. <span style="font-family:arial">The stove turned off without smoke.</span></pre>
<pre style="white-space:pre-wrap;color:rgb(0,0,0)"><span style="font-family:arial">Then, several hours later, in the evening, i could  restart the stove with the same remaining fuel, with no addtional pellets . I only put some alcohol at the top and start the fire with a match or a spark. At the beginning, the stove start to burn the charcoal with a blue flame, until the heat or combustion front reach the wood pellets layer. Then the stove start to functioning again like a normal TLUD stove with wood pellets.</span><br>
</pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><span style="font-family:arial">With this method, you can turn off a TLUD stove, and later restart the stove with the same remaining fuel (charcoal and fuel).</span></pre>
<pre style="white-space:pre-wrap;color:rgb(0,0,0)">I will do the same exercise again, to see if i can replicate the experiment.</pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><span style="font-family:arial">Cheers</span></pre>
<pre style="white-space:pre-wrap;color:rgb(0,0,0)"><span style="font-family:arial;color:rgb(34,34,34)">Roberto Poehlmann</span><br></pre><pre style="white-space:pre-wrap;color:rgb(0,0,0)"><span style="font-family:arial;color:rgb(34,34,34)">Valdivia, Chile</span></pre>
</div>