<div dir="ltr"><div>Dear Huck;</div><div><br></div><div>Charcoal from pellets burn slowly in a Champion-type TLUD, because there is not enough primary air movement.  The resistance to gas movement in the charcoal bed is too high.  Also, there isn't the draft from a strong pyrogas flame.</div><div><br></div><div>If you burn wood chips or sticks, the gas permeability of the char bed is high, and the charcoal will burn off quite well.</div><div><br></div><div>It would be nice, however, if one can get the charcoal fire closer to the bottom of the pot so that there is better transmission of radiant heat.  Paul has a TLUD for that which breaks in half when the pyrolysis phase is complete.  Otherwise the path between the char fire and the pot should be well insulated.</div><div><br></div><div>Some people mention how good it is to have a fan to force the primary air.  That is true for pellets, but not so much for sticks and chips, because their permeability is already high and their bulk density is low (so you will burn off your batch of fuel is 10 minutes if you force the air).</div><div><br></div><div>(I should note that the gas permeability of a bed of fine wood chips (< 10 mm)  is also low).</div><div><br></div><div>I keep promising data to show this.  Its coming soon.</div><div><br></div><div>Cheers, <br>Julien.<br clear="all"><br>-- <br></div><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div>
</div>