<div dir="ltr"><div><br clear="all">Dear Crispin;</div><div><br></div><div>Thanks for you comments.  The idea of using a metal grate as a 'pot' is a good one, as well as a gear on the bottom of the inner distributer.</div><div><br></div><div>One advantage of this inner distributer, is that you can screw all sorts of thing on the bottom to modify the air flow.  I have tired using holes rather than a gap, but it was not as successful as the gap, because the holes created more resistance to air flow.  Resistance to air flow becomes especially important when using both the central air supply and peripheral air supply, because they are competing for the same draft.   I haven't yet tried to create a swirl.</div><div><br></div><div>When I use the central distributor on its own, the flame tends to travel up the side walls of the riser.  That is not good so good, especially if your riser is not insulated.  By adding some secondary air from the circumference, that is avoided.</div><div><br></div><div>As for pots, I have heard rumors about those.</div><div><br></div><div>Julien.</div><div><br></div><div><br>-- <br></div><div class="gmail_signature"><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div></div>
</div>