<div dir="ltr"><div>Hi Stovers;</div><div><br></div><div>The temperature measurements I made using 1/8 inch stainless steel probes and a K-type, non-grounded thermocouple.  The datalogger was a four channel Omega HH1384.</div><div><br></div><div>I have also tried a central distributor for secondary air using a pipe up the middle of the TLUD (see attached).  There are a few reasons why I don't like this method.</div><div><br></div><div>1) it compromises the integrity of the TLUD reactor, and can make it harder to load fuel.</div><div>2) the secondary air supply does not self regulate its flow rate according to pyrogas flame size as well as secondary air supplied by horizontal pipes in the burner.</div><div>3) it could make the control mechanism for primary air more complicated.</div><div><br></div><div>Used on its own, the central distributor didn't supply enough secondary air, so the gas flame produced smoke.  The supply of secondary air was much better with a burner with peripheral air holes was used (the "PA").</div><div><br></div><div>Cheers,</div><div>Julien.</div><div><br></div><div><br></div><div><br clear="all"><br>-- <br></div><div class="gmail_signature"><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div></div>
</div>