<html>
  <head>
    <meta content="text/html; charset=windows-1252"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    Ron,                                                (to website)<br>
    <br>
    You make good points.  But the devil is in the details, or in the
    realities of our world.<br>
    <br>
    1.  If the monitors of the Stoves Listserv want to enforce the
    definition that we can only discuss biomass fuels and related
    stoves, I will comply.   However, until such a ruling is debated and
    stated clearly, I contend that writing and talking about coal as a
    cookstove fuel is informative and we all need to be aware of its
    pros and cons, as well as the occasional mentions of LPG and
    kerosene (paraffin).   See more below.<br>
    <br>
    2.  As much as I agree with you and the EPA on the issues of climate
    change and CO2 increases in the atmosphere (being bad), there are
    very very very few of us (off grid, etc, etc.) in the developed
    countries who do not have a positive (bad) CO2 footprint every
    day.   By sending an email from Illinois, I use electricity that has
    some mix of power that comes from fossil fuels.  The EPA will leave
    me alone.  They should be after the big fish who emit much CO2.<br>
    <br>
    3.  An impoverished household in Mongolia or elsewhere that can cook
    and heat cleanly (health-wise) with coal is another truly small fish
    regarding its CO2 footprint.  We should not be working or advocating
    against them having coal-burning stoves that are CLEAN for their
    health (CO2 is not poisonous).   That is so, especially while we
    affluent folks run around in automobiles and heat much larger homes
    to probably warmer temperatures and also lavish ourselves with air
    conditioning, with so much energy derived from fossil fuels.  <br>
    <br>
    4.  One household is one small amount of CO2 that could be
    justified, but would 100,000 households be a different story?   Or
    10 MILLION households, as could easily be the case if China turned
    to using the new coal-stove design now in use in Mongolia?  That
    could be a lot of CO2 increase.   But it would be a lot of CO2 if
    those became LPG burners.   Fuel supply is crucial.   We cannot deny
    people the opportunity to cook their meals or warm their homes
    because "acceptable renewable" fuels are not available.  Crispin, do
    you have numbers (CO2, black carbon, methane, etc.) about the
    climate impact of the new coal burners <u>in comparison with </u>the
    climate impact of the old-style coal burners?   How much better
    (lower climate impact)?   Is that improvement not sufficient
    justification to stimulate (financially bolster) the transition from
    the old to the new coal burners?   Ron, could that improvement be
    the realistic goal, or should the short term goal be the abolition
    of all coal burning stoves?<br>
    <br>
    5.  The GACC certainly embraces clean burning LPG and natural gas,
    and would like to have clean-burning kerosene stoves.   The GACC <i><u><b>either</b></u></i>
    must condemn those "advanced" fossil fuels and their stoves <b><u>OR
      </u></b>embrace coal with clean-burning coal stoves.   To leave
    LPG in and exclude coal is hypocrisy that must be addressed at the
    GACC Forum in November.   Either all cleanly burned fossil fuels and
    their stoves must be acceptable to the GACC, or no fossil fuels
    should be in the GACC discussions and programs.  <br>
    <br>
    We know (and are grateful) that leaders in the GACC and WB and EPA
    do read the Stoves Listserv, although they seldom comment.   The
    comments in #5 above should have some reply by the end of October so
    that the issue will be addressed at the November Forum, either with
    or without GACC's agreement with #5.  Fossil fuels with GOOD stoves
    are either ALL IN or art ALL OUT.  At the Forum, certainly the World
    Bank and other financial backers of the Mongolia success will be
    advocating for coal to be included, along with the attendees from
    Mongolia.    Other supporters should be those who work with LPG,
    natural gas, and kerosene, otherwise they face opposition to the
    continued inclusion of those fuels in any GACC programs.  To exclude
    them would be like making them automatic Tier 1 or Tier 0 (bad)
    stoves and fuels.<br>
    <br>
    It will be interesting to see who rises to advocate exclusion of all
    fossil fuels and stoves.  Being selective of some and not other
    fossil fuels is not allowed.   All in or all out!!!    Or does
    climate change trump family health?<br>
    <br>
    Paul<br>
    <pre class="moz-signature" cols="72">Doc  /  Dr TLUD  /  Prof. Paul S. Anderson, PhD  
Email:  <a class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu">psanders@ilstu.edu</a>   
Skype: paultlud      Phone: +1-309-452-7072
Website:  <a class="moz-txt-link-abbreviated" href="http://www.drtlud.com">www.drtlud.com</a></pre>
    <div class="moz-cite-prefix">On 9/15/2015 1:33 PM, Ronal W. Larson
      wrote:<br>
    </div>
    <blockquote
      cite="mid:0FCBCB14-5951-4CAD-BDD6-606E2CF163FA@comcast.net"
      type="cite">
      <meta http-equiv="Content-Type" content="text/html;
        charset=windows-1252">
      <div>Paul  cc list</div>
      <div><br>
      </div>
      <div><span class="Apple-tab-span" style="white-space:pre">        </span>Well
        - I have to disagree.  </div>
      <div><br>
      </div>
      <div><span class="Apple-tab-span" style="white-space:pre">        </span>Our
        EPA has declared that CO2 from all fossil fuels is a pollutant.
         That was held up in the US Supreme Court. Most of the world
        agrees that fossil fuel CO2 needs to be eliminated and that is
        what COP21 in Paris is about.</div>
      <div><br>
      </div>
      <div><span class="Apple-tab-span" style="white-space:pre">        </span> Per
        the latest IPCC documents,  we have to get off all fossil fuels.
         And so I hope that GACC will stay away from endorsing any coal,
        oil, or natural gas consuming stove.  Those fuels don’t need the
        help of this list or GACC.   Biomass can supply all those forms
        of energy anyway - in most cases cheaper where biomass cook
        stoves are now in use.</div>
      <div><br>
      </div>
      <div>
        <blockquote type="cite" style="widows: 1;"><span class="Apple-tab-span" style="white-space:pre">    </span>Additionally
          the guiding words for this list emphasize it is for biomass.
           [“<span style="background-color: rgb(255, 255, 255); widows:
            1;"><font face="Verdana, Tahoma, DejaVu Sans, sans-serif"><span
                style="font-size: 12px; line-height: 18px;"><u><b>Our
                    site is dedicated to helping people develop better
                    stoves for cooking with biomass fuels in developing
                    regions.”]</b></u></span></font></span></blockquote>
      </div>
      <div><br>
      </div>
      <div>Ron</div>
      <div><br>
      </div>
      <br>
      <div>
        <div>On Sep 15, 2015, at 6:01 AM, Paul Anderson <<a
            moz-do-not-send="true" href="mailto:psanders@ilstu.edu"><a class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu">psanders@ilstu.edu</a></a>>
          wrote:</div>
        <br class="Apple-interchange-newline">
        <blockquote type="cite">
          <div bgcolor="#FFFFFF" text="#000000" style="font-family:
            Helvetica; font-size: 18px; font-style: normal;
            font-variant: normal; font-weight: normal; letter-spacing:
            normal; line-height: normal; orphans: auto; text-align:
            start; text-indent: 0px; text-transform: none; white-space:
            normal; widows: auto; word-spacing: 0px;
            -webkit-text-stroke-width: 0px;">Dear
            ALL,                                                          
            (post to<span class="Apple-converted-space"> </span><a
              moz-do-not-send="true" href="http://drtlud.com/"
              style="color: purple; text-decoration: underline;">drtlud.com</a><span
              class="Apple-converted-space"> </span>website)<br>
            <br>
            EVERYONE should carefully read Crispin's message (below).  I
            cannot substantiate his comments about specific stoves, and
            we will hope that Prof. Lloyd will send references about the
            Scotch Method.<br>
            <br>
            Otherwise, I am IN TOTAL AGREEMENT WITH CRISPIN.   Read each
            line, soak it in. <span class="Apple-converted-space"> </span><br>
            <br>
            Concerning the stoves in Mongolia, of course I am delighted
            that:
            <blockquote type="cite"><span>all but one of them is a TLUD.</span></blockquote>
            But that is not the issue.   The issue is that low grade
            coal is able to be burned cleanly in sufficiently
            inexpensive cookstoves for the climate and culture.  Note
            that those Mongolian stoves have an important function for
            household heating, helping to justify the higher costs of
            stoves with heavier metal.  The probable financial
            assistance ("subsidy" to the purchaser) can be justified in
            the clean air accomplishments that benefit not just the
            impoverished people, but also all of the wealthy who want
            clean air both locally and internationally (global air
            quality issues are important). <span
              class="Apple-converted-space"> </span><br>
            <br>
            The Mongolian stoves are not being proclaimed as being for
            tropical areas where the stove constructions and costs need
            to be different.<br>
            <br>
            About coal as fuel for stoves and home heaters:  Coal needs
            to be included in the fuels for cookstoves WHEN COUPLED WITH
            CLEAN-BURNING STOVES.  When that is the case, the only major
            "negative characteristic" is that coal is a fossil fuel
            (being carbon positive to the atmosphere).   Well, that also
            applies to LPG !!!!  which is a very highly regarded fuel
            for clean cookstoves.   Double standards are not acceptable.
              This issue needs to be addressed!!!   <span
              class="Apple-converted-space"> </span><br>
            <br>
            And it should be addressed at least by the time of the GACC
            Forum in Ghana on 10 -13 Nov where a resolution or statement
            or declaration (or whatever groups do) could be officially
            made about the acceptability of coal as a cookstove fuel
            WHEN USED IN CLEAN-BURNING STOVES.<br>
            <br>
            None of the above is against fan-assisted stoves or natural
            draft TLUDs.  Instead, the effort is to  get coal and the<span
              class="Apple-converted-space"> </span><b><u>appropriate</u></b>coal-burning
            stoves added to the list of contributing solutions to the
            world's cookstove problems.<br>
            <br>
            Comments please to the Stoves Listserv.<br>
            <br>
            Paul<br>
            <br>
            <pre class="moz-signature" cols="72" style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';">Doc  /  Dr TLUD  /  Prof. Paul S. Anderson, PhD  
Email:  <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu" style="color: purple; text-decoration: underline;">psanders@ilstu.edu</a>   
Skype: paultlud      Phone: +1-309-452-7072
Website:  <a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="http://www.drtlud.com/" style="color: purple; text-decoration: underline;">www.drtlud.com</a></pre>
            <div class="moz-cite-prefix">On 9/14/2015 10:45 PM, Crispin
              Pemberton-Pigott wrote:<br>
            </div>
            <blockquote
              cite="mid:COL401-EAS341D5127111A321E8227536B15C0@phx.gbl"
              type="cite">
              <div class="WordSection1" style="page: WordSection1;">
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Dear Paul<o:p></o:p></span></p>
                <div style="margin: 0cm 0cm 0.0001pt; line-height:
                  normal; font-size: 11pt; font-family: Calibri,
                  sans-serif;"><span>That linked document has this to
                    say: “</span><span style="font-size: 11.5pt;
                    font-family: Arial, sans-serif; color: windowtext;">For
                    biomass cooking, pending further evidence from the
                    field, significant health benefits are possible only
                    with the highest quality fan gasifier stoves…”<o:p></o:p></span></div>
                <div style="margin: 0cm 0cm 0.0001pt; line-height:
                  normal; font-size: 11pt; font-family: Calibri,
                  sans-serif;"><span style="font-size: 11.5pt;
                    font-family: Arial, sans-serif; color: windowtext;"> </span></div>
                <div style="margin: 0cm 0cm 0.0001pt; line-height:
                  normal; font-size: 11pt; font-family: Calibri,
                  sans-serif;"><span>I don’t know who invented that idea
                    – it is traceable to Kirk Smith (Bangkok, Nov 2010)
                    but I think the concept that ‘the only really clean
                    stoves are fan assisted gasifiers’ is older than
                    that. Maybe it emerged from Berkeley. It doesn’t
                    matter.<o:p></o:p></span></div>
                <div style="margin: 0cm 0cm 0.0001pt; line-height:
                  normal; font-size: 11pt; font-family: Calibri,
                  sans-serif;"><span style="font-size: 11.5pt;
                    font-family: Arial, sans-serif; color: windowtext;"> </span></div>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>It is not true.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Is that clear enough? How
                    else can we say it? It is not true that the only
                    really clean stoves are fan assisted gasifiers. This
                    caution is also contained in the statement, “It is
                    not true that the only really clean stoves are fan
                    assisted or ND TLUD pyrolysers.”<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>The most expensive
                    externally funded improved stove replacement
                    programme in the world is the Mongolian urban ger
                    stove programme, funded by the US-based MCC through
                    the MCA-Mongolia account, the WB, the Asian
                    Development Bank and the City Government of
                    Ulaanbaatar. There are a large number of additional
                    players including Xaas Bank, carbon trading funders
                    and national Ministries.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Assiduously examining a
                    large number of stove options, and creating an
                    advanced testing laboratory on a shoe string,
                    incorporating a test method that predicts reasonably
                    the field performance (field testing proved to be
                    nearly impossible, even for LBNL, which tried hard)
                    a set of stoves that are well over 90% cleaner than
                    the baseline stoves (several >98%) was selected
                    for distribution. Not one of them is fan assisted
                    and not one of them is a pyrolyser save in the sense
                    that all coal stoves are pyrolysers. Certainly it is
                    true that all solid fuel stoves are gasifiers.
                    Quibbling will not change the fact flames burn gas.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>A lot of people worked
                    hard to bring this together and pull off the biggest
                    clean-up of a major city’s air ever accomplished
                    without changing the fuel – because the fuel was<span
                      class="Apple-converted-space"> </span><i>never<span
                        class="Apple-converted-space"> </span></i>the
                    problem. It is an excellent fuel and burns so
                    cleanly the stove comparison chart would have to
                    create two more tiers to fairly accommodate them.
                    The fact that this achievement is still ignored
                    continues to stain the ICS community. The reason for
                    this is obvious: coal is supposed to be the demon
                    fuel that cannot be burned cleanly. Millions of
                    people are going to burn coal for a long time to
                    come – deal with it. Burn it properly.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>These super-clean stoves
                    originate from Turkey, China and Mongolia. The
                    producers pay no attention to anything going on in
                    the “TLUD world”, even though all but one of them is
                    a TLUD.  It is unfortunate that the fictions that
                    “solid fuels cannot be burned cleanly”, and “only
                    fans work”, and “coal cannot be burned cleanly”
                    because it contains “pollution” are repeated by
                    those who should know their field better.  Making
                    these statements makes the speaker look like a
                    disconnected amateur. Modern Austrian fireplaces are
                    cleaner than most very improved stoves and they are
                    made of brick for heaven’s sake. They are not even
                    ‘stoves’. The Russians are building ‘bell’ heat
                    exchangers that are brilliant.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>The IC stove community has
                    to start living in the present.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Here is a test of the
                    laboratory air at the SEET lab and the emissions of
                    a cross draft stove (currently reproduced exactly by
                    a small local welding shop in Ulaanbaatar):<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>[[ Image deleted from copy
                    of message.]]<br>
                  </span><span><o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>These two Dusttraks were
                    compared with each other before this photo was
                    taken. They agreed within 2 micrograms at a
                    concentration of more than 400.  The one on the left
                    is brand new, brought by LBNL (Berkeley) measuring
                    the ambient air (195<span
                      class="Apple-converted-space"> </span></span><span>µ</span><span>g/m<sup>3</sup>)
                    and the one on the right is from SEET Lab sampling
                    directly from the chimney (0</span><span><span
                      class="Apple-converted-space"> </span>µ</span><span>g/m<sup>3</sup>).<span
                      class="Apple-converted-space"> </span><i>That<span
                        class="Apple-converted-space"> </span></i>is a
                    clean stove.<i><span class="Apple-converted-space"> </span></i>The
                    dirty air going into the stove is being cleaned by
                    the fire, while burning wet lignite: 50% volatiles
                    (AD) and 26% moisture.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>It is high time to admit
                    that coal and indeed wood can be burned by a number
                    of methods extremely well.  No fuel has a monopoly
                    on cleanliness.  The concept of a ‘dirty fuel’ is
                    archaic and was never correct. It was always a
                    misconception.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Equally incorrect is the
                    idea that ethanol, for example, is a ‘clean fuel’. I
                    have just seen a test of an ethanol stove that
                    doesn’t come close to meeting the South African
                    kerosene stove test requirement at high power or
                    low. This is quite common. Most ethanol stoves are
                    not very clean when it comes to CO. They literally
                    can’t hold a candle to the stoves sold in
                    Ulaanbaatar that burn lignite. Why? Bad combustion.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>What’s next? China of
                    course. And India. Why should their stove programmes
                    be held back by errant preconceptions originating
                    within the ‘clean air’ and ‘clean stove’
                    communities? If the clean air and clean stove
                    communities can’t keep up with reality, others will
                    step in to lead. Projects are not going to be
                    willing to spend $50m on junk science claims. Or
                    $500m.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Paul, you are correct to
                    ask for references. The method of burning coal
                    “TLUD” is called the ‘Scotch Method’ in South
                    African and goes back over a century. I believe Prof
                    Lloyd has some sources for that because he was
                    thinking about the problem in the mid-70’s.<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Regards to all<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span>Crispin<o:p></o:p></span></p>
                <p class="MsoNormal" style="margin: 0cm 0cm 8pt;
                  line-height: 15px; font-size: 11pt; font-family:
                  Calibri, sans-serif;"><span> </span></p>
                <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';"><o:p> </o:p></pre>
                <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';">In case you have not seen this, micro-gasifiers have received some significant recognition (ESMAP + GACC 2015 publication, page 90). <o:p></o:p></pre>
                <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';"><a moz-do-not-send="true" href="https://openknowledge.worldbank.org/bitstream/handle/10986/21878/96499.pdf" style="color: purple; text-decoration: underline;">https://openknowledge.worldbank.org/bitstream/handle/10986/21878/96499.pdf</a>  <o:p></o:p></pre>
                <blockquote style="margin-top: 5pt; margin-bottom: 5pt;">
                  <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New'; line-height: 13px;"><span style="font-size: 11pt; line-height: 15px; font-family: Calibri, sans-serif;" lang="EN-US"> “<b>The most exciting technology trend in the biomass cookstove sector is<o:p></o:p></b></span></pre>
                  <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New'; line-height: 13px;"><b><span style="font-size: 11pt; line-height: 15px; font-family: Calibri, sans-serif;" lang="EN-US">the growing range of forced draft and natural draft gasifier stoves</span></b><span style="font-size: 11pt; line-height: 15px; font-family: Calibri, sans-serif;" lang="EN-US">.  These stoves have shown the greatest<o:p></o:p></span></pre>
                  <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New'; line-height: 13px;"><span style="font-size: 11pt; line-height: 15px; font-family: Calibri, sans-serif;" lang="EN-US">potential to improve health and environmental outcomes, at least under<o:p></o:p></span></pre>
                  <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';"><span style="font-size: 11pt; font-family: Calibri, sans-serif;" lang="EN-US">laboratory conditions.”  (ESMAP 2015, p. 90).  </span><o:p></o:p></pre>
                  <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';"><o:p> </o:p></pre>
                </blockquote>
              </div>
              <br>
              <fieldset class="mimeAttachmentHeader"></fieldset>
              <br>
              <pre style="margin: 0cm 0cm 0.0001pt; font-size: 10pt; font-family: 'Courier New';" wrap="">_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org" style="color: purple; text-decoration: underline;">stoves@lists.bioenergylists.org</a>

to UNSUBSCRIBE or Change your List Settings use the web page
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" style="color: purple; text-decoration: underline;">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>

for more Biomass Cooking Stoves,  News and Information see our web site:
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://stoves.bioenergylists.org/" style="color: purple; text-decoration: underline;">http://stoves.bioenergylists.org/</a>

</pre>
            </blockquote>
            <br>
            _______________________________________________<br>
            Stoves mailing list<br>
            <br>
            to Send a Message to the list, use the email address<br>
            <a moz-do-not-send="true"
              href="mailto:stoves@lists.bioenergylists.org"
              style="color: purple; text-decoration: underline;">stoves@lists.bioenergylists.org</a><br>
            <br>
            to UNSUBSCRIBE or Change your List Settings use the web page<br>
            <a moz-do-not-send="true"
href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org"
              style="color: purple; text-decoration: underline;">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a><br>
            <br>
            for more Biomass Cooking Stoves,  News and Information see
            our web site:<br>
            <a moz-do-not-send="true"
              href="http://stoves.bioenergylists.org/" style="color:
              purple; text-decoration: underline;">http://stoves.bioenergylists.org/</a><br>
            <br>
          </div>
        </blockquote>
      </div>
      <br>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a>

to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>

for more Biomass Cooking Stoves,  News and Information see our web site:
<a class="moz-txt-link-freetext" href="http://stoves.bioenergylists.org/">http://stoves.bioenergylists.org/</a>

</pre>
    </blockquote>
    <br>
  </body>
</html>