<div dir="ltr"><div><div><div><div><div>Hi Roberto;<br><br></div>This is an interesting discussion.  A comment and a question.<br><br></div>Comment: the flame speed of H2 is very fast, so you are likely getting H2 burning from the lower air holes.  H2 flames are virtually invisible, so you will not see them.<br><br></div>A question: do the lower air holes blow the gases and focus heat to the centre of the burner?  If so, it is interesting that gases get back out to your upper air holes.  Gases will be entrained into the upper level air jets, and that could be pulling gases back out the the periphery; along with localized bouyancy in the flamelets.  The ca 45° upward angle is likely important.  <br><br>Adjusting the vertical angle of the air jets would be an interesting experiment, because I think the angle is critical to the function of your burner.<br><br></div><div>In my experience, pellet fuels have a lower maximum gasification rate than some fuels with a more open fuel bed.  If you intend to burn sticks, you will have to run some tests on those as well.<br></div><div><br></div>Cheers,<br></div>Julien.<br clear="all"><div><div><div><div><div><div><br>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div></div></div></div></div></div>
</div></div></div></div></div></div></div>