<div dir="ltr"><div><div><div><div><div><div>Hi Roberto;<br><br></div>I am sorry that I didn't read back through the threat when I wrote my last email.  I didn't realize that you were designing for pellets only.<br><br></div>Some what I have been saying about tall flames from narrow tubes origniates from when I was mucking aound with Kero-Sun radiant burners.  I have attached a summary of what I did that you may find useful: "TLUD_Vertical_SecondaryAir.pdf"<br><br></div>I found that narrow cylinders with perferorated walls were good for supporting flames at low gasification rates, but they creaded tall, narrow diffusion flames.  Introducing air into that narrow flame and mixing it up was the next challenge.  There may be a way of blowing the flame apart with piped tertiary air. <br><br>I put the perforated tubes into my tool box of ideas, and moved on to other approaches, because I am designing for coarse fuel.  However, the low turndown in possible perforated cylinders is important<br></div><br></div>Cheers,<br></div>Julien.<br><div><div><div><div><div><div><pre><br><br></pre><div><br>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div></div></div></div></div></div>
</div></div></div></div></div></div></div></div>