<p dir="ltr">Dear Alex,<br>
Yes, this vertical side holes are there for gasify the top char, and to try to have a premixing flame. Other objectives is to try to shorten the flames at higher gasification rates.<br>
But in this experiment, i put a top ring without holes to eliminate the effect of the vertical holes in the combustion chamber.<br>
The flame colour, with or without the vertical holes, are very similar, maybe more bluish with the holes.<br>
Without the holes, the flame is a little more stable at low rates.<br>
With the top ring on, maybe there is a little portion of air that surpass the joint, but i thing is not relevant.<br>
I will make another series of burns with a completly sealed combustion chamber, and with the vertical holes.</p>
<p dir="ltr">Best regards<br>
Roberto Poehlmann<br>
Valdivia, Chile</p>
<p dir="ltr">"Roberto,</p>
<p dir="ltr">It looks from your pictures that there are some side holes into the fuel<br>
container. These would  gasify some char  and possibly channel some air<br>
through to contribute to partial premixing. Are there any other spots like<br>
seams or joints that could allow a bit of air in prior to the secondary air<br>
holes?<br>
Alex<br>
"</p>