<div dir="ltr"><div><div><div><div><div>Hi Crispin;<br><br></div>Thanks for all the advice.<br><br></div>I have a small test of concept project in the works to see if I can get a porous, radiant burner to work on a natural draft TLUD.  <br><br>I not optimistic, but if one doesn't try one doesn't know.  The problem will be sufficient mixing of gas and air before they enter the ceramic foam disk, and low gas pressured to drive the system.<br><br></div>Because the gas pressure will be low, the open cell structure in the ceramic foam will have to be coarse.  To do that, I am making a fugitive template from soybean seeds stuck together with tapioca starch.  The slip is a commercial porcelain clay.  For a coarser template, I am using maraschino cherries!!  They will be fired to ca. 1200 °C.<br><br></div><div>I think this will be a recipe for smoke, and the burner may disintegrate after a few moments.  But at least I will see what happens.<br></div><div><br></div>Cheers,<br></div>Julien.<br clear="all"><div><div><div><div><div><div><br>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Julien Winter<br>Cobourg, ON, CANADA<br></div></div></div></div></div></div>
</div></div></div></div></div></div></div>