<div><div>Dr. Karve,  we have all seen this. Anytime charcoal is left after an outside fire, the rain washes it.  I would suspect the more soluble compounds would wash quite easy. An ebb and flow wash would be most effective. Wash water should have the lowest salt content possible.  Some.charcoals have a more open porosity than others. Smaller particles would wash more completely. As far as silica, I doubt if the compounds would dissolve enough to remove all of it. Some plants are much lower in silica than others as you know. As usual, the best way to know is to try washing the charcoal you have with distilled water and dry it before and after. Then weigh it. Then dry out the water and test the residue. Or just test the water. Then you know exactly. Dan Dimiduk </div><div><br/></div><div><i><font style="color:#333333">Sent from my Verizon Wireless 4G LTE DROID</font></i></div></div><br><br>Anand Karve <adkarve@gmail.com> wrote:<br><br><div dir="ltr">Dear Stovers,<div>we have developed a TLUD process for making charcoal by charring agricultural waste. Since a lot of the agri-waste comes from grain crops belonging to the family Poaceae, the ash content is rather high due to the silica in the plants. Mineral coal is washed in order to reduce its ash content and to increase its calorific value. I was wondering if the same can be done in the case of charcoal.I can of course conduct a few experiments and find the answer, but I would be grateful to the list if somebody knows the answer and provides it to me.</div><div>Yours</div><div>A.D.Karve<br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature">***<br>Dr. A.D. Karve<br><br>Chairman, Samuchit Enviro Tech Pvt Ltd (<a href="http://www.samuchit.com" target="_blank">www.samuchit.com</a>)<br><br>Trustee & Founder President, Appropriate Rural Technology Institute (ARTI)<br></div></div>
</div></div>