<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
"Tank weight equal to gas content" seems somewhat over-optimistic
(from the gas vendor's point of view). A 16 kg capacity LPG cylinder
that I have in my household (in Taiwan) is marked with a tare weight
of 19.30 kg, and a 20 kg one is marked 22.5 kg. I assume the ratio
becomes even more unfavorable with smaller tanks, unless the steel
is thinner.<br>
<br>
The lost space between cylinders would only be relevant if the
truck's load space can be completely filled without exceeding its
weight capacity. For the pellets too, you would need to know whether
the limiting factor is weight or volume.<br>
<br>
If weight is the limiting factor for the LPG's outward journey, then
presumably some limited capacity will be available for carrying
other loads on the return journey, alongside the empty cylinders.<br>
<br>
Re "B. Additional transport": Unless you are talking about setting
up a new cylinder loading point, then surely the cost of bulk
transport is already included in the LPG price at the existing
loading point, so it is not relevant to your calculation. <br>
<br>
Robert Taylor<br>
<br>
<br>
<div class="moz-cite-prefix">On 2018-02-14 04:04, Paul Anderson
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:3fbb824e-b153-cd13-7df1-02c719423035@ilstu.edu">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
Thanks so far to Steven and Crispin.<br>
<br>
<blockquote type="cite">You can guess that the LPG (46 MJ/kg) is
about 2.7 times the energy of the pellets (17 MJ/kg), however
the empty mass of the tank is about equal to the gas contents.
Thus the energy content per transported kg is only 1.35 times
that of the wood.</blockquote>
The above is by weight. Great. <br>
<br>
And we need to factor in the empty space between the cylinders. I
will GUESS that the space between cylinders is about equal to the
volume (space) of the cylinder (allowing also for the space of the
base and the top handle/valve of the LPG cylinder) . That would
cut the transported of LPG in about half BY VOLUME. So again the
energy content of the LPG is 1.35 times that of the pellets. <br>
<br>
If so, then either by weight or by volume in the cargo area of a
delivery truck, the fossil fuel transport for an equal distance
would be 1.35 times as much energy delivered as that of pellets.
<br>
<br>
But as Steven pointed out (below), the empty cylinders need to be
"back hauled" from the community, with extra cost of loading and
unloading. So MAYBE we can call the transport cost to be equal
for LPG and pellets for equal journeys.<br>
<br>
But if the refill station is twice as far away as is the source of
the pellets (or vice versa), the cost of transport of the
further-sourced fuel is double in terms of the driving time and
double the fuel-of-transport costs.<br>
<br>
Crispin, my interest is specifically for "regular" densified wood
pellets, not for torrified pellets that cost more to make and have
less of the original wood-energy in them (in terms of boimass
input, not in terms of energy per kg.). And torrification is at
more centralized locations than is the basic pelletizing
operations.<br>
<br>
I agree that if the pellets are consumed in TLUD pyrolytic
gasifiers with the production of charcoal, the ENERGY releasd is
about a third less than if the pellets were burned all the way to
ash. This loss is countered by the value of the charcoal, whether
for later burning or as char that somebody in the destination
community finds to be desireable, perhaps to be biochar or for
water filters or other.<br>
<br>
For the comparative discussion of LPG or pellets for new stoves in
a community, the decisive factors are NOT only with the
transportation. The decisive factors include:<br>
<br>
A. fossil fuel (and CO2 positive) vs renewable fuel (and CO2
neutral,--- or negative if biochar goes to the soil).<br>
<br>
B. Additional transport: If the LPG is bulk-trucked or even
piped to the cylinder loading point, but the pellets are made near
the loading point, the PPG becomes more expensive.<br>
<br>
C. Cost per MJ of energy: The WLPGA (World LPG Association)
presentations point out that biomass is less expensive per MJ than
is wood. But we are dealing with pelletized wood, which has
incurred extra processing costs. But I suspect that the pellets
are still significantly less expensive per MJ than would be the
LPG.<br>
<br>
D. Supply of the original materials (oil and wood/biomass):
Much depends on the geographic location. But where wood and other
biomass suitable for pelletizing are sufficient for continual
supply, the reliance on petroleum to yield LPG or to have LPG from
sources of natuarl gas is a negative for LPG. <br>
<br>
Currently LPG is rather plentiful in the world. Very unequally
distributed, but there is much of it. Middle-east oil and North
America natural gas from fracking are the main sources. That
will rise and fall, for sure, but not known when.<br>
<br>
Wood and other suitable biomass for pellets is also rather
plentiful, and more widely distributed. What would be useful
would be small (not tiny or micro) pelitizing facilities that are
either (or both) relatively inexpensive for continual operations
to serve appropriately sized areas/communities OR semi-portable
pelletizers, being able to be moved closer to the sources of the
biomass, perhaps seasonally. <br>
<br>
Why does this interest me (and you)? Because processed, uniform,
clean to handle, dense pellets of biomass are such a great fuel
for the forced-air TLUD stoves that can give justifiably serious
competition to LPG. The Mimi-Moto and the FAAbulous TLUD-FA
stoves will eventually established a major project (with large
numbers of users), quite possiblly in a peri-urban area where they
will replace charcoal stoves, and where LPG never had much of the
action.<br>
<br>
Stay tuned.<br>
<br>
Paul<br>
<pre class="moz-signature" cols="72">Doc / Dr TLUD / Prof. Paul S. Anderson, PhD
Email: <a class="moz-txt-link-abbreviated" href="mailto:psanders@ilstu.edu" moz-do-not-send="true">psanders@ilstu.edu</a>
Skype: paultlud Phone: +1-309-452-7072
Website: <a class="moz-txt-link-abbreviated" href="http://www.drtlud.com" moz-do-not-send="true">www.drtlud.com</a></pre>
<div class="moz-cite-prefix">On 2/13/2018 12:41 PM, Crispin
Pemberton-Pigott wrote:<br>
</div>
<blockquote type="cite"
cite="mid:BN6PR2201MB1233FAA4F7A22F9B5ADE0353B1F60@BN6PR2201MB1233.namprd22.prod.outlook.com">
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<meta name="Generator" content="Microsoft Word 15 (filtered
medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
{mso-style-priority:99;
mso-style-link:"Plain Text Char";
margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
span.PlainTextChar
{mso-style-name:"Plain Text Char";
mso-style-priority:99;
mso-style-link:"Plain Text";
font-family:"Calibri",sans-serif;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoPlainText">Dear Paul<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Perhaps you could consider
transporting <a
href="https://www.pellet.org/images/5%20-%20Bahman%20Ghiasi.pdf"
moz-do-not-send="true"> torrefied pellets</a> instead of
raw wood (21 MJ/kg). Not only is it more energy per ton, it
is more likely not to be damaged by moisture. That link has
some interesting info BTW.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">You can guess that the LPG (46 MJ/kg)
is about 2.7 times the energy of the pellets (17 MJ/kg),
however the empty mass of the tank is about equal to the gas
contents. Thus the energy content per transported kg is only
1.35 times that of the wood.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">In terms of cost the wood should be
cheaper, delivered.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">If you are turning the wood into char
and not burning it, the cost advantage will be lost. I
presume you have a plan to offset that.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Regards<br>
Crispin<o:p></o:p></p>
</div>
</blockquote>
And Steven Law wrote:
<blockquote type="cite">
<pre wrap="">A few thoughts for consideration:
1. LPG is a fossil fuel that emits GHG while wood pellets are a renewable fuel when made of sustainable forest products
2. the weight of the LPG containers is considerable for transportation purposes since they have to be transported twice in order to be used once, whereas the wood pellets only have to be transported once and the truck can be used to transport something else during the return trip
3. the shape of the LPG containers does not lend themselves to easy stacking and will waste a lot of space in the truck whereas wood pellets can be stacked quite densely and there won't be any wasted space on the truck
4. the LPG containers will degrade over time and may eventually leak or explode whereas this will never happen with wood pellets
5. the LPG will not likely keep money in the local community, but rather the money will be exported from the community to pay for the imported fuel, whereas wood pellets will likely keep money in the local community and provide local jobs and tax revenue
6. the ash from burning wood pellets can be used as a soil fertilizer to grow more food in the community
I hope these few thoughts lend themselves to a more community based holistic view to the problem with a triple bottom line approach, rather than a single bottom line calculation with the primary motivation to be maximizing profit for LPG companies.</pre>
</blockquote>
<o:p> </o:p>
<blockquote type="cite"
cite="mid:BN6PR2201MB1233FAA4F7A22F9B5ADE0353B1F60@BN6PR2201MB1233.namprd22.prod.outlook.com">
<div class="WordSection1">
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><span
style="mso-fareast-language:EN-CA" lang="EN-US">-----Original
Message-----<br>
From: Stoves [<a class="moz-txt-link-freetext"
href="mailto:stoves-bounces@lists.bioenergylists.org"
moz-do-not-send="true">mailto:stoves-bounces@lists.bioenergylists.org</a>]
On Behalf Of Paul Anderson<br>
Sent: 13-Feb-18 10:15<br>
To: Stoves and biofuels network <a
class="moz-txt-link-rfc2396E"
href="mailto:Stoves@lists.bioenergylists.org"
moz-do-not-send="true"><Stoves@lists.bioenergylists.org></a><br>
Subject: [Stoves] Bulk density of LPG vs pellets</span></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Dear Stovers and friends,<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">I hope that someone can provide an
answer to this question:<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">The situation: A fuel for cooking
needs to be transported to communities in somewhat remote
locations. There are roads that at least allow a pickup
truck to go in and out year-round. The people have access
to locally sources woody biomass fuel, but are interested in
having some better stoves with processed fuels. In
particular, they are considering LPG in standard
bottles/tanks that are brought in full, and empties are
taken back. They are also considering pellets that are
in typical 40 pound (~18 kg) bags, with local sales in
smaller quanties. Consider initially that the pellets are
made in the same location where the LPG bottles are
refilled. (We can consider different distances of transport
later, if of interest). (also, there will be some
differences if different sizes of LPG bottles or pellets in
super-sacks are used, but that is not of much interest in
this initial<o:p></o:p></p>
<p class="MsoPlainText">discussion.)<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">The question: How much energy can be
transported in each delivery trip, and which becomes the
most economical -- or are they about the same? The LPG has
more energy per kg of fuel, but must be transported in metal
containers that are cylindrircal and occupy much space.
The pelelts are in bags that can be stacked (such as on a
pallet of pellets).<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Boilse down to: LPG in bottles vs
pellets in sacks.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">My thanks to everyone who contributes
to answering this question.<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">Paul<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">--<o:p></o:p></p>
<p class="MsoPlainText">Doc / Dr TLUD / Prof. Paul S.
Anderson, PhD<o:p></o:p></p>
<p class="MsoPlainText">Email: <a
href="mailto:psanders@ilstu.edu" moz-do-not-send="true"><span
style="color:windowtext;text-decoration:none">psanders@ilstu.edu</span></a><o:p></o:p></p>
<p class="MsoPlainText">Skype: paultlud Phone:
+1-309-452-7072<o:p></o:p></p>
<p class="MsoPlainText">Website: <a
href="https://nam03.safelinks.protection.outlook.com/?url=www.drtlud.com&data=02%7C01%7C%7C1f5941fb59884cf761ce08d572f51165%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636541319233583963&sdata=8C5DI9HeatzQFb69kgQKaQyCKIdwesQi2QiWGKaJork%3D&reserved=0"
moz-do-not-send="true"> <span
style="color:windowtext;text-decoration:none">https://nam03.safelinks.protection.outlook.com/?url=www.drtlud.com&data=02%7C01%7C%7C1f5941fb59884cf761ce08d572f51165%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636541319233583963&sdata=8C5DI9HeatzQFb69kgQKaQyCKIdwesQi2QiWGKaJork%3D&reserved=0</span></a><o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">_______________________________________________<o:p></o:p></p>
<p class="MsoPlainText">Stoves mailing list<o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">to Send a Message to the list, use the
email address<o:p></o:p></p>
<p class="MsoPlainText"><a
href="mailto:stoves@lists.bioenergylists.org"
moz-do-not-send="true"><span
style="color:windowtext;text-decoration:none">stoves@lists.bioenergylists.org</span></a><o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">to UNSUBSCRIBE or Change your List
Settings use the web page<o:p></o:p></p>
<p class="MsoPlainText"><a
href="https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.bioenergylists.org%2Fmailman%2Flistinfo%2Fstoves_lists.bioenergylists.org&data=02%7C01%7C%7C1f5941fb59884cf761ce08d572f51165%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636541319233583963&sdata=nK%2BkbaxuWRqc0xoNqzOfzMkGydnq2JMURI%2FFPFn6io0%3D&reserved=0"
moz-do-not-send="true"><span
style="color:windowtext;text-decoration:none">https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.bioenergylists.org%2Fmailman%2Flistinfo%2Fstoves_lists.bioenergylists.org&data=02%7C01%7C%7C1f5941fb59884cf761ce08d572f51165%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636541319233583963&sdata=nK%2BkbaxuWRqc0xoNqzOfzMkGydnq2JMURI%2FFPFn6io0%3D&reserved=0</span></a><o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
<p class="MsoPlainText">for more Biomass Cooking Stoves, News
and Information see our web site:<o:p></o:p></p>
<p class="MsoPlainText"><a
href="https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fstoves.bioenergylists.org%2F&data=02%7C01%7C%7C1f5941fb59884cf761ce08d572f51165%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636541319233583963&sdata=yfZUYxdY1H5n8t2EXOTUft8ptyWgYYvvVFRTcOTK4qI%3D&reserved=0"
moz-do-not-send="true"><span
style="color:windowtext;text-decoration:none">https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fstoves.bioenergylists.org%2F&data=02%7C01%7C%7C1f5941fb59884cf761ce08d572f51165%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636541319233583963&sdata=yfZUYxdY1H5n8t2EXOTUft8ptyWgYYvvVFRTcOTK4qI%3D&reserved=0</span></a><o:p></o:p></p>
<p class="MsoPlainText"><o:p> </o:p></p>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Stoves mailing list
to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org" moz-do-not-send="true">stoves@lists.bioenergylists.org</a>
to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org" moz-do-not-send="true">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>
for more Biomass Cooking Stoves, News and Information see our web site:
<a class="moz-txt-link-freetext" href="http://stoves.bioenergylists.org/" moz-do-not-send="true">http://stoves.bioenergylists.org/</a>
</pre>
</blockquote>
<br>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Stoves mailing list
to Send a Message to the list, use the email address
<a class="moz-txt-link-abbreviated" href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.org</a>
to UNSUBSCRIBE or Change your List Settings use the web page
<a class="moz-txt-link-freetext" href="http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org">http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org</a>
for more Biomass Cooking Stoves, News and Information see our web site:
<a class="moz-txt-link-freetext" href="http://stoves.bioenergylists.org/">http://stoves.bioenergylists.org/</a>
</pre>
</blockquote>
<br>
</body>
</html>