<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">Andrew:</div><div class="gmail_quote">Yes, I was thinking about this after our previous exchange.<br></div><div class="gmail_quote">I'd guess there is no fan on your device. It should be easy to check if there is a flow through the<br></div><div class="gmail_quote">intake orifice.<br></div><div class="gmail_quote">It should behave more like a smoke detector - the air has some degree of "cloudiness"<br></div><div class="gmail_quote">and it doesn't matter if the air is moving or still.<br></div><div class="gmail_quote">With a dilute mixture and measurement of individual or cumulative scattered light "hits" on a <br></div><div class="gmail_quote">sensor, it is related to particle concentration in the air which is unchanged by velocity.<br><br></div><div class="gmail_quote">For the dilution scheme that I described, I had forgotten about this. You'd actually need to<br></div><div class="gmail_quote">add a small fan if you wanted to try this approach, in order to establish a flow that can be diluted.<br></div><div class="gmail_quote"><br></div><div class="gmail_quote">Crispin:<br></div><div class="gmail_quote">Earlier you mentioned a flue gas measurement of 30,000,000 ug/m3 PM in Ulaanbaatar. That converts to roughly<br></div><div class="gmail_quote">350 g/kg, or more than 1/3 of your fuel leaving the stack as PM (normalized to 13% O2), way off the map of anything I<br></div><div class="gmail_quote">have ever seen or hear of. I'm not really familiar with coal or high fly ash, so can't hazard a guess - seems almost impossible.<br><br></div><div class="gmail_quote">Norbert<br></div><div class="gmail_quote"><br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div>
Message: 2<br>
Date: Thu, 13 Sep 2018 09:30:53 +0100<br>
From: Andrew Heggie <<a href="mailto:aj.heggie@gmail.com">aj.heggie@gmail.com</a>><br>
To: Discussion of biomass cooking stoves<br>
        <<a href="mailto:stoves@lists.bioenergylists.org">stoves@lists.bioenergylists.<wbr>org</a>><br>
Subject: Re: [Stoves] Personal Particulate Monitor<br><br>
I've made the subject a bit more appropriate, comments below:<br>
<br>
<br></div>(snip)<br><div>
> I doubt whether the flow speed through it would affect the particle concentration, ie if you<br>
> put a sampling tube on it.<br>
<br>
This confuses me somewhat, surely to measure concentration one needs<br>
to know how much air is passing the sensor and then count the light<br>
reflected off particles. or is there another way of knowing a<br>
concentration?  I thought perhaps it assumed the fan drew a fixed<br>
volume per second and then the reflections were counted and calculated<br>
as a mass in that volume. If a restriction from a tube reduces the<br>
flow then a smaller volume passes but the sensor still counts the now<br>
lesser number of reflections, giving a lower reading??<br>
><br clear="all"></div></blockquote></div><br>-- <br><div class="gmail_signature" data-smartmail="gmail_signature">Norbert Senf<br>Masonry Stove Builders<br>25 Brouse Road, RR 5<br>Shawville Québec J0X 2Y0<br>819.647.5092<br><a href="http://www.heatkit.com" target="_blank">www.heatkit.com</a></div>
</div></div>