[Digestion] flame lifting

[Deepak D. G.]

Good Evening Paul,

Thanks for the advice. I will try to reduce the gas jet size first 
before trying other tips and follow by closing the tap  bit.
I hope I don't have to increase the  burner hole size.

Rgds,
Deepak

Paul Harris wrote:
> G'day Deepak et al,
>
> The link just suggested (which has section on flame lift - you don't really
> need all the equations) confirms my initial response that the gas speed it
> too high, so you either need to reduce the supply pressure (just close the
> tap a bit) or reduce the gas jet size (and hence the stove heat output) or
> increase the burner hole size to reduce the gas velocity (the last approach
> keeps/increases the heat output).
>
> Happy digesting,
> HOOROO
>
> Mr. Paul Harris, Room 202 Charles Hawker Building, Faculty of Sciences, The 
> University of Adelaide, Waite Campus, PMB 1, Glen Osmond SA 5064 Ph    : +61
> 8 8303 7880      Fax   : +61 8 8303 4386
> mailto:paul.harris at adelaide.edu.au  
> http://www.adelaide.edu.au/directory/paul.harris
>
> CRICOS Provider Number 00123M
> This email message is intended only for the addressee(s) and contains
> information that may be confidential and/or copyright.  If you are not the
> intended recipient please notify the sender by reply email and immediately
> delete this email. Use, disclosure or reproduction of this email by anyone
> other than the intended recipient(s) is strictly prohibited. No
> representation is made that this email or any attachments are free of
> viruses. Virus scanning is recommended and is the responsibility of the
> recipient.
>
>
>