[Gasification] rope seals for really sealing?
Rolf Uhle
energiesnaturals at gmx.de
Sat Aug 27 07:43:23 CDT 2011
Hallo Jim,
about which temp range are we talking?
if it has to be fibre, i know that sometimes the old folks used to impregnate
it with graphite powder.
If the temp.is low enough for high temp grease, you could try some
copper/graphit mounting paste on the fibre rope.
Rolf
Am Samstag, 27. August 2011 08:39:19 schrieb jim mason:
> do people think it possible to really get an air tight atm seal with
> fiberglass or ceramic rope as the gasket? most boiler doors can
> tolerate a little tiny bit of leaking air, but at the base of a
> gasifier any air you let in is going to burn some of your gas. yes,
> you can really tolerate a bit of this too, but ideally, we'd have
> absolutely zero air in.
>
> it seems difficult to do this with regular braided rope. maybe
> impregnating it with high temp grease is enough to make it seal.
>
> what is the collected wisdom on door seals?
>
> for reference, here's the basic different types of ropes available:
> http://www.mcmaster.com/#bulb-seal-gaskets/=dspae9
>
> j
>
More information about the Gasification
mailing list