[Gasification] Fwd: RE: Whole log pyrolysis for char production was Re: W...

[Mark Ludlow]

GF, most use catalysts which are easily fouled (that's why NG  or propane is
a preferred fuel.)

 

Mark

 

From: Gasification [mailto:gasification-bounces at lists.bioenergylists.org] On
Behalf Of Jeff Davis
Sent: Saturday, January 04, 2014 5:59 PM
To: Discussion of biomass pyrolysis and gasification
Subject: Re: [Gasification] Fwd: RE: Whole log pyrolysis for char production
was Re: W...

 

GF,

Here's a bit of an example:
 <http://www.naturescomfortllc.com/gt-series-downdraft-wood-furnace/>
<http://www.naturescomfortllc.com/gt-series-downdraft-wood-furnace/>



Jeff



On 01/04/2014 08:13 PM, GFWHELL at aol.com <mailto:GFWHELL at aol.com>  wrote:

Using radiant heat  from refractory (ceremics)
There is something about the performance of the ceramic panels which burn
gas for the  production of radiant  heat.   They run at about 1000F
 I believe these panels would be capable of cleaning the gas leaving the
production zone of  a down daft gasifier.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20140104/b935a7dc/attachment.html>