[Gasification] Mk2 Chip Guillotine
Doug.Williams at orcon.net.nz
Fri Jan 24 15:45:42 CST 2014
Hi Jason and Colleagues,
Thanks for all the ideas that have been promoted, and as you can see, I have completed all the variations possible within the limitations imposed by existing mechanisms. This pedal linkage allowed me to change rotating arcs, which in the end all determine the distance of travel and the forces at the cutting edge.
Having proven the simple hand guillotine both works and with a reasonable amount of force at the blade, that is the end of my involvement to make the concept principles into some thing else. It isn't hard for me to see, that larger mechanised versions could have plenty of scope to be included in all sorts of cutting applications, but don't expect me to design them for you(:-)
Will find time this week to draw up the design and make it available on the Fluidyne Archive www.fluidynenz.250x.com as soon as possible, and advise you accordingly.
> On Sat, 25 Jan 2014 08:42:51 +1300
> Jason <urepedese at gmail.com> wrote:
> > Doug,
> > I have an idea for the foot lever but will need a day so to get it drawn.
> > It MAY help the design and hopefully incorporate increasing leverage to
> > solve the issue Mark outlines.
> > Jason
Doug <Doug.Williams at orcon.net.nz>
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 370953 bytes
Desc: not available
More information about the Gasification