[Gasification] [Stoves] Mk2 Chip Guillotine

Big Daddy bigdaddy at offgridpro.com
Tue Jan 28 16:30:56 CST 2014


Interesting 30" camera iris:
http://www.youtube.com/watch?v=TuEqHp64UvQ


-----Original Message-----
From: Gasification [mailto:gasification-bounces at lists.bioenergylists.org] On
Behalf Of Kevin
Sent: Tuesday, January 28, 2014 1:57 PM
To: Doug; Discussion of biomass pyrolysis and gasification
Cc: Discussion of biomass pyrolysis and gasification; Discussion of biomass
cooking stoves
Subject: Re: [Gasification] [Stoves] Mk2 Chip Guillotine

Dear Doug

----- Original Message ----- 
From: "Doug" <Doug.Williams at orcon.net.nz>


> Hi Kevin,
>
> I love the idea of having actually dry logs to burn. Ours remain wet until
> they rot, probably because we have no really cold snow season.

# Our "standing deadwood" seems to dry out well.
>
> What did catch my eye, is the Iris opening device. I have never made 
> anything
> like this, so does anyone have a reference site that I can study?

I haven't seen any plans on how to build one, but for starters, if you had 
an old camera, ready for discard, you could take it apart carefully, to see 
the principles of operation.
>
> My chip guillotine is now completed as required by myself as you can see 
> from
> this mornings photo, so next job is the drawing(:-)

# It is a lovely piece of workmanship, and the "Fluidine Colours" add 
greatly to "the professionalism of the build."

Best wishes,

Kevin
>
> Doug Williams,
> Fluidyne.
>
>
>
> On Tue, 28 Jan 2014 10:25:58 -0400
> "Kevin" <kchisholm at ca.inter.net> wrote:
>
>> Dear Doug
>>
>> "The best way to solve a problem is to eliminate it in the first place."
>>
>> These folks have found a way to eliminate most of the need for fuel 
>> sizing.
>> Looks like they could burn "kill dried wood" without the need for 
>> blocking,
>> splitting, or chipping. It is sort of like an oversized Rocket Type 
>> stove.
>>  http://www.gizmag.com/spruce-stove-log/29863/
>>
>> Kevin
> 


_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
Gasification at bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenerg
ylists.org

for more Gasifiers,  News and Information see our web site:
http://gasifiers.bioenergylists.org/





More information about the Gasification mailing list