[Gasification] Where is Everyone?

Bob Stuart bobstuart at sasktel.net
Mon Jan 2 23:08:30 CST 2017


The "Rocket" stove?  That's not a ramjet at all, and the only thing they 
have in common with a real rocket is the noise.

Bob


On 17-01-02 09:47 PM, jbunny at goldcity.net wrote:
> scroll all the way down to the bottom of the page. 6 inch stove pipe , 
> 80 watt –12volt charging
> http://tecteg.com/thermoelectric-generator-power-products-for-sale/
> Louis in central BC
> *From:* sabbadess at aol.com <mailto:sabbadess at aol.com>
> *Sent:* Monday, January 02, 2017 5:53 PM
> *To:* gasification at lists.bioenergylists.org 
> <mailto:gasification at lists.bioenergylists.org>
> *Subject:* Re: [Gasification] Where is Everyone?
> Charles,
> Ramjets don't work in stationary applications.  They need the air to 
> be rammed in by velocity to make the Brayton cycle work.
> Stephen
> -----Original Message-----
> From: bayent <bayent at ns.sympatico.ca>
> To: Discussion of biomass pyrolysis and gasification 
> <gasification at lists.bioenergylists.org>
> Sent: Mon, Jan 2, 2017 8:51 pm
> Subject: Re: [Gasification] Where is Everyone?
>
> Doug would a ram jet engine run ok on Woodgate?
> It should...
> Turbine in outflow from ram jet?
> C
> Sent from my Bell Samsung device over Canada's largest network.
>
>
> -------- Original message --------
> From: Doug <doug.williams.nz at gmail.com 
> <mailto:doug.williams.nz at gmail.com>>
> Date: 2017-01-02 7:15 PM (GMT-04:00)
> To: gasification at lists.bioenergylists.org 
> <mailto:gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] Where is Everyone?
>
> Hi Bob,
> I have seen direct coupled car turbo's hooked to a pressurized 
> gasifier/stove, and in that situation, was fed hot gas straight out of 
> the gasifier. It's not that it doesn't work, just that it's almost 
> impossible to prevent the impeller from coking up and blocking. Not 
> sure how you would actually hook a generating device on this, but 
> opportunity to develop that hot gas to power directly would be a game 
> changer. You also have to consider the power demand required for air 
> input compression.
> Doug Williams.
> On 03/01/17 11:34, Bob Stuart wrote:
>
>     Best Possible New Year, everyone.
>     I arrived here after a period with wood heat but no electricity at
>     all, when I got interested in steam.  Thanks to all for a great
>     education on the options.  I am hoping to find a new situation
>     with younger people around where I can use a gasifier.  What I'd
>     like to try would be expensive if I wanted maximum efficiency, but
>     where the need for heat is high and power modest, I think a great
>     simplification might work.
>     With a turbocharger from a car, I think it would be easy to just
>     pressurize an airtight stove to produce a solid-fuel gas turbine. 
>     I presume that sticking a magnet on the cold end would let a coil
>     pull the power off.  Raising the pressure would get more
>     efficiency, but drive up the bill for exotic materials.
>     Best,
>     Bob Stuart,
>     Spiritwood, SK
>
>
> _______________________________________________
> Gasification mailing list
>
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org <mailto:Gasification at bioenergylists.org>
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> for more Gasifiers, News and Information see our web site:
> http://gasifiers.bioenergylists.org/
>
> ------------------------------------------------------------------------
> _______________________________________________
> Gasification mailing list
>
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> for more Gasifiers,  News and Information see our web site:
> http://gasifiers.bioenergylists.org/
>
>
> _______________________________________________
> Gasification mailing list
>
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> for more Gasifiers,  News and Information see our web site:
> http://gasifiers.bioenergylists.org/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20170102/919e65d4/attachment.html>


More information about the Gasification mailing list