[Greenbuilding] Oversized wood stove // was: H2k and NZE home modelling
Corwyn
corwyn at midcoast.com
Thu Jan 27 11:25:59 CST 2011
On 1/27/2011 11:46 AM, Reuben Deumling wrote:
> I've also figured out
> how to make a fire that only lasts 50 minutes and adds about 4-5 degrees
> F to the rooms further from the stove, which suggests to me that I'll be
> able to make this woodstove work when I've completed my Larsen
> Truss/R-40 walls and the rest of it (someday).
> Or am I missing something? Is there a stove size (however this is
> measured) that is particularly well suited to tuning along this scale?
> Was I just lucky?
I am often in the position of wondering whether to build a fire today.
It is getting on to 5:00pm, the temperature in the house is 65 degrees.
It will probably be a bit chilly (59) tomorrow morning, if I don't;
however, I don't want it to be too hot, nor (to be honest) do I want to
go through the effort. Starting a fire is the time consuming part. And
short, hot fires, are more time consuming in the preparation stages as
well (more splitting etc.) I often check the weather report to see
about nighttime temperatures, and longer forecasts. And thinking about
what I will be doing tomorrow.
The size of the stove has a small impact, in that a small stove will get
to its peak efficiency faster, so a quick fire will spend more time in
that zone.
I generally need to consider stove size from the other perspective (for
clients). How _big_ does it need to be to provide the desired heat in
the amount of time available?
--
Topher Belknap
Green Fret Consulting
Kermit didn't know the half of it...
http://www.greenfret.com/
topher at greenfret.com
(207) 882-7652
More information about the Greenbuilding
mailing list