[Greenbuilding] Door frames and gaskets

[bilrob at silcom.com]

If you are looking for an inexpensive way to weatherstrip a door the Jamb-Up product is simple and easily installed.
http://www.amazon.com/M-D-Building-Products-1958-Weatherstrip/dp/B000CRFXFI

It is usually available in similar forms from lumberyards and big box stores.

Here is a link to how I do it.
http://youtu.be/A591Ev-tZDw 

Bill Robinson
----- Original Message -----
From: bill allen <bill.allen at verizon.net>
To: Bob Klahn <Home-NRG at dnaco.net>, Green Building <greenbuilding at lists.bioenergylists.org>
Sent: Mon, 19 Aug 2013 21:53:21 -0700 (PDT)
Subject: Re: [Greenbuilding] Door frames and gaskets

Thanks for the suggestions.

I have been trying to picture/design the "close on top" door but haven't come up with a good solution yet.  The devil is in the details...if anyone can point me to any examples I could use as a model, I would really appreciate it.

Can't add any additional space so the mud room idea won't work.

I do plan to have a storm door so that will help a little.

Bill
------Original Message------
From: Bob Klahn
To: Bill Allen
To: Green Building
Subject: Re: [Greenbuilding] Door frames and gaskets
Sent: Aug 20, 2013 12:00 AM

Bill,

The weatherstrip trade-named "Q-lon" is available from our area "big 
box" stores, mostly as a replacement for OEM weatherstrip, and is 
secured in a routed channel by an "arrow strip" along the back edge.  It 
stays very flexible in low temperatures and has a good bit of flex, to 
stay in contact with doors which shift with the seasons.  It has a thin 
skin and can be damaged by snagging it tearing but is still fairly 
durable.  I had some with small, surface tears, which still served well 
for many years.

Q-lon used to be available in a wood backing, for installation as a 
normal aftermarket door weatherstrip, but I haven't seen it for some years.

I like RT's suggestion of a surface mounted and closing door but, on 
another tack, what about adding a small airlock chamber/mud room to the 
outside of the prime door?

Bob Klahn
On 8/17/2013 7:19 AM, bill.allen at verizon.net wrote:
> I am finishing up a small outbuilding that will be conditioned (living space) all year in NE PA. Since it's small, the entrance door is an unusually large percentage of the wall surface area. I plan to build my own, insulated door but I have the following 2 questions and would really appreciate any info/comments:
>
> 1) A traditional door frame would be the worst thermal bridge offender in the whole project. Is there a construction technique that would eliminate this?
>
> 2) Local box stores offer many types of gaskets/sealers for all 4 sides of a door.  What are folks using to get the best seal?
>
> Thanks for your consideration.
>
> Bill
>
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org


_______________________________________________
Greenbuilding mailing list
to Send a Message to the list, use the email address
Greenbuilding at bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org