[Gasification] Gasification Digest, Vol 26, Issue 9
vikrant bhalerao
vikrantbhalerao12 at gmail.com
Sun Oct 14 22:54:18 CDT 2012
Hi Tom and Doug,
Thanks for the knowledge sharing.
Doug, I agree with you. We have engines on PG but more over we want to go
for higher capacity engines. Currently engines running on PG have the CR 11
for NA engines and For TC its 8.5 .. But fpr same case in NG we can go
higher.
I am trying to think from combustion perspective to increase further to
sqeeze out more power and thermal eff. . So far i tried till 12.5 (though
literature mentioned about 17) and whatever thermodynamic state of mixture
(PG + Air) shows positive signs and CFD also support it..
With Regards,
Vikrant Bhalerao
Cummins India Ltd.
Mobile +91 89 833 20 725
On Mon, Oct 15, 2012 at 12:30 AM, <
gasification-request at lists.bioenergylists.org> wrote:
> Send Gasification mailing list submissions to
> gasification at lists.bioenergylists.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> or, via email, send a message with subject or body 'help' to
> gasification-request at lists.bioenergylists.org
>
> You can reach the person managing the list at
> gasification-owner at lists.bioenergylists.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gasification digest..."
>
>
> Today's Topics:
>
> 1. Regarding Combustion Quality of Producer gas (doug.williams)
> 2. Lister on Gasoline, ingition control device? (Pete & Sheri)
> 3. Re: Lister on Gasoline, ingition control device? (Mark E. Ludlow)
> 4. Re: Lister on Gasoline, ingition control device? (Ken Boak)
> 5. Re: Lister on Gasoline, ingition control device? (Alex English)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 14 Oct 2012 16:36:08 +1300
> From: "doug.williams" <Doug.Williams at orcon.net.nz>
> To: "Discussion of biomass pyrolysis and gasification"
> <gasification at lists.bioenergylists.org>
> Subject: [Gasification] Regarding Combustion Quality of Producer gas
> Message-ID: <55EF3921E6744E539CE1B9C2BDCC1291 at dougspc>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Tom R. and Gasification Colleagues,
>
> When Vicrant posted his original question to this forum regarding Methane
> Numbers, I did wonder why he would have a need to ask, especially as
> Cummins already use their engines for producer gas, along with Methane
> numbers (but probably for natural gas).
>
> There once was a time, when you had to ask questions of those who engaged
> is certain fields for their technical assistance, but today thanks to
> Wikipedia, terminology such as cetane, octane, and methane, plus all the
> associated related details, are there for dopes like me to access quickly.
> It certainly beats opening the office door and hunt through the dust
> covered files!
>
> http://www.cumminspower.com/www/Commercial/Set_ng50/C1750_N5C_ng50.html
>
> These modern engines are like Tom suggests:
>
> >Modern engines use knock sensors/timing to increase combustion efficiency
> by operating just below the knock limit. I presume that this would greatly
> increase power >and efficiency of PG, but I don't know if they could
> increase CR enough to accommodate PG.
>
> You can dig out all the facts for yourself, but the success of extracting
> the maximum energy of the producer gas is not only the engineering nuts and
> bolts, cams, turbo, intercoolers, compression ratios, rpm, etc, but to the
> software developed to manage producer gas. These are the new engines we
> have been waiting for, at least for clean producer gas, but even using that
> term can open up a can of worms for the engine warranties.
>
>
> What we don't see spelt out about producer gas, is that it's variations
> away from what we might call "normal analysis" is infinite, and how that
> affects the combustion chemistry, engine operation and/or it's componentry
> life. That we might choose to fiddle with older basic slow speed engines to
> make them perform better for basic electrical and mechanical power, these
> modern high speed engines place real challenge on the gas making
> consistency.
>
> Gasification remains for me one of the most challenging technologies that
> have crossed my path, and if I think for one minute I have it by the tail,
> the other end will bite me given the right conditions.
>
> Onwards as Tom R. suggests.
>
> Doug Williams,
> Fluidyne...
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20121014/ad1614cf/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Sat, 13 Oct 2012 22:50:07 -0500
> From: "Pete & Sheri" <spaco at baldwin-telecom.net>
> To: "'Discussion of biomass pyrolysis and gasification'"
> <gasification at lists.bioenergylists.org>
> Subject: [Gasification] Lister on Gasoline, ingition control device?
> Message-ID: <000601cda9bf$00eb4a00$02c1de00$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> Hello, Ken.
>
> Did you ever publish the circuit for your ignition control device? I
> seem
> to remember seeing a video that showed it in action. Looked like maybe
> there was an Arduino in there somewhere.
>
>
>
> Pete Stanaitis
>
> ----------------
>
> From: Gasification [mailto:gasification-bounces at lists.bioenergylists.org]
> On
> Behalf Of Ken Boak
> Sent: Saturday, October 13, 2012 12:28 PM
> To: Discussion of biomass pyrolysis and gasification
> Subject: Re: [Gasification] Regarding Combustion Quality of Producer gas
>
>
>
> Alex,
>
>
>
> We* found that the Lister had to be significantly advanced when running on
> woodgas in spark ignition mode.
>
>
>
> It was anticipated that we might have to be 20 degrees BTDC, but when the
> engine was finally running well, it was found to be around 57 degrees BTDC.
>
>
>
>
> The Lister has a 24" diameter flywheel, thus a 75.4" circumference. Our
> optimum ignition point was found to be 12" on the rim ahead of the TDC
> position.
>
>
>
> The Lister rpm was limited to 600rpm because of an undesirable resonance
> around 610rpm - a quirk of the specific engine we were using at APL.
> Normally the 6hp Lister should rev to 650rpm without vibration.
>
>
>
> Marcus Hardwick and I wrote up most of the technical detail here
>
>
>
>
> http://wiki.gekgasifier.com/w/page/30448258/Spark%20conversion%20for%20Liste
> r%20slow%20speed%20diesel%20engines<http://wiki.gekgasifier.com/w/page/30448258/Spark%20conversion%20for%20Lister%20slow%20speed%20diesel%20engines>
>
>
>
> We* - the Lister team at the April APL workshop consisted of Ron Ohler,
> Andy
> Schofield, Marcus Hardwick, myself and contributions from other workshop
> delegates.
>
>
>
>
>
> regards
>
>
>
>
>
>
>
> Ken
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20121013/eba74955/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Sat, 13 Oct 2012 22:26:49 -0700
> From: "Mark E. Ludlow" <mark at ludlow.com>
> To: "'Discussion of biomass pyrolysis and gasification'"
> <gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] Lister on Gasoline, ingition control
> device?
> Message-ID: <04c801cda9cc$83506900$89f13b00$@ludlow.com>
> Content-Type: text/plain; charset="us-ascii"
>
> At 57deg BTDC, what is the manifold pressure? This seems reasonable but how
> would some mild supercharge affect this timing?
>
>
>
> Great topic!
>
>
>
> Mark
>
>
>
> From: Gasification [mailto:gasification-bounces at lists.bioenergylists.org]
> On
> Behalf Of Pete & Sheri
> Sent: Saturday, October 13, 2012 8:50 PM
> To: 'Discussion of biomass pyrolysis and gasification'
> Subject: [Gasification] Lister on Gasoline, ingition control device?
>
>
>
> Hello, Ken.
>
> Did you ever publish the circuit for your ignition control device? I
> seem
> to remember seeing a video that showed it in action. Looked like maybe
> there was an Arduino in there somewhere.
>
>
>
> Pete Stanaitis
>
> ----------------
>
> From: Gasification [mailto:gasification-bounces at lists.bioenergylists.org]
> On
> Behalf Of Ken Boak
> Sent: Saturday, October 13, 2012 12:28 PM
> To: Discussion of biomass pyrolysis and gasification
> Subject: Re: [Gasification] Regarding Combustion Quality of Producer gas
>
>
>
> Alex,
>
>
>
> We* found that the Lister had to be significantly advanced when running on
> woodgas in spark ignition mode.
>
>
>
> It was anticipated that we might have to be 20 degrees BTDC, but when the
> engine was finally running well, it was found to be around 57 degrees BTDC.
>
>
>
>
> The Lister has a 24" diameter flywheel, thus a 75.4" circumference. Our
> optimum ignition point was found to be 12" on the rim ahead of the TDC
> position.
>
>
>
> The Lister rpm was limited to 600rpm because of an undesirable resonance
> around 610rpm - a quirk of the specific engine we were using at APL.
> Normally the 6hp Lister should rev to 650rpm without vibration.
>
>
>
> Marcus Hardwick and I wrote up most of the technical detail here
>
>
>
>
> http://wiki.gekgasifier.com/w/page/30448258/Spark%20conversion%20for%20Liste
> r%20slow%20speed%20diesel%20engines<http://wiki.gekgasifier.com/w/page/30448258/Spark%20conversion%20for%20Lister%20slow%20speed%20diesel%20engines>
>
>
>
> We* - the Lister team at the April APL workshop consisted of Ron Ohler,
> Andy
> Schofield, Marcus Hardwick, myself and contributions from other workshop
> delegates.
>
>
>
>
>
> regards
>
>
>
>
>
>
>
> Ken
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20121013/a7123151/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Sun, 14 Oct 2012 09:26:34 +0100
> From: Ken Boak <ken.boak at gmail.com>
> To: Discussion of biomass pyrolysis and gasification
> <gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] Lister on Gasoline, ingition control
> device?
> Message-ID:
> <CAOqQ0iZeCALhPWRJCKT+Cak7q_mE2n95qjH0_YW+=_
> SGxodo5A at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Peter, List
>
> Just for explanation, the Lister conversion project took place over three
> consecutive Workshops at All Power Labs, Berkeley, California. Between Feb
> 2010 and April 2012, the team slowly picked away at the project.
>
> The original spark ignition circuit was based on an Arduino, with a Hall
> effect sensor being triggered by a tiny neodynium magnet taped to the
> flywheel rim. A darlington transistor drove the low tension side of a car
> ignition coil.
>
>
> https://files.pbworks.com/download/Mk7b7ymPda/gekgasifier/30638003/Lister_spark.pdf
>
> I used a variable resistor on one of the analogue input pins as a "timing
> control". The idea was to fit the magnet very well in advance of the
> optimum position, and then adjust the timingcontrol to add a given delay,
> to allow the firing point to be adjusted to the position that gave the best
> running.
>
> This is what we used in the February 2010 workshop, when the engine first
> ran on woodgas. However a later discovered bug in my code meant that the
> timing control was not really working as intended.
>
> For the Fall workshop of 2010, I remade the ignition circuit on stripboard
> and shipped it out to California, and Ron Ohler, Mike La Rosa, Marcus
> Hardwick worked on the project. I could not attend that workshop.
>
> The team fitted the newly positioned spark plug in the side port and proved
> that the engine would run.
>
> Marcus and I revisited the Lister project in March 2012 in the run up to
> the April workshop. The Lister was converted back to stock 17:1 compression
> ratio and given a new head gasket and more permanent arrangement with
> gasifier, cooling and exhaust systems.
>
> The electronic ignition (my department) was our Achilles heel this year,
> and after a couple of microcontroller and transistor burn-outs, we
> eventually replaced it with a commercial MSD spark ignition unit and coil.
> Ron Ohler and Andy Schofield went on to get the engine running sweetly,
> after a lot of fiddling looking for the best ignition point.
>
> I have now returned to the UK, and I am keen to maintain interest going in
> the spark conversion of diesel engines. The developing countries are
> littered with small hp diesels such as Lister, Petter, Changfa clones
> performing pumping, generation and agricultural processing tasks. To come
> up with a cost effective spark conversion for these generic engines so that
> they can be economically run on producer gas from biomass, would be a major
> step towards petroleum independence.
>
> The original IISc paper describing the performance testing of a 3 cylinder
> spark converted Indian diesel engine at 17:1 CR is here:
>
>
> http://cgpl.iisc.ernet.in/site/Portals/0/Publications/ReferedJournal/Biomass%20derived%20producer%20gas%20as%20a%20reciprocating.pdf
>
>
>
> regards
>
>
>
> Ken Boak
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20121014/1c296333/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 5
> Date: Sun, 14 Oct 2012 14:50:14 -0400
> From: Alex English <english at kingston.net>
> To: Discussion of biomass pyrolysis and gasification
> <gasification at lists.bioenergylists.org>
> Subject: Re: [Gasification] Lister on Gasoline, ingition control
> device?
> Message-ID: <507B0966.40102 at kingston.net>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>
> Ken,
> The paper from India states that there is some de-rating for producer
> gas compared to diesel with their engine. They didn't see the same sweet
> spot for spark advance theorizing a need for retarding spark because of
> high hydrogen flame speed. Different engine, different PG? In their
> case NOxide emissions increase 2 to 10 fold with increased spark
> advance. Is this a concern with Mr.Lister? After CR, what accounts for
> all the extra power with your test rig?
>
> Thanks,
> Alex
>
>
>
>
>
> On 14/10/2012 4:26 AM, Ken Boak wrote:
> > Hi Peter, List
> >
> > Just for explanation, the Lister conversion project took place over
> > three consecutive Workshops at All Power Labs, Berkeley, California.
> > Between Feb 2010 and April 2012, the team slowly picked away at the
> > project.
> >
> > The original spark ignition circuit was based on an Arduino, with a
> > Hall effect sensor being triggered by a tiny neodynium magnet taped to
> > the flywheel rim. A darlington transistor drove the low tension side
> > of a car ignition coil.
> >
> >
> https://files.pbworks.com/download/Mk7b7ymPda/gekgasifier/30638003/Lister_spark.pdf
> >
> > I used a variable resistor on one of the analogue input pins as a
> > "timing control". The idea was to fit the magnet very well in advance
> > of the optimum position, and then adjust the timingcontrol to add a
> > given delay, to allow the firing point to be adjusted to the position
> > that gave the best running.
> >
> > This is what we used in the February 2010 workshop, when the engine
> > first ran on woodgas. However a later discovered bug in my code meant
> > that the timing control was not really working as intended.
> >
> > For the Fall workshop of 2010, I remade the ignition circuit on
> > stripboard and shipped it out to California, and Ron Ohler, Mike La
> > Rosa, Marcus Hardwick worked on the project. I could not attend that
> > workshop.
> >
> > The team fitted the newly positioned spark plug in the side port and
> > proved that the engine would run.
> >
> > Marcus and I revisited the Lister project in March 2012 in the run up
> > to the April workshop. The Lister was converted back to stock 17:1
> > compression ratio and given a new head gasket and more permanent
> > arrangement with gasifier, cooling and exhaust systems.
> >
> > The electronic ignition (my department) was our Achilles heel this
> > year, and after a couple of microcontroller and transistor burn-outs,
> > we eventually replaced it with a commercial MSD spark ignition unit
> > and coil. Ron Ohler and Andy Schofield went on to get the engine
> > running sweetly, after a lot of fiddling looking for the best ignition
> > point.
> >
> > I have now returned to the UK, and I am keen to maintain interest
> > going in the spark conversion of diesel engines. The developing
> > countries are littered with small hp diesels such as Lister, Petter,
> > Changfa clones performing pumping, generation and agricultural
> > processing tasks. To come up with a cost effective spark conversion
> > for these generic engines so that they can be economically run on
> > producer gas from biomass, would be a major step towards petroleum
> > independence.
> >
> > The original IISc paper describing the performance testing of a 3
> > cylinder spark converted Indian diesel engine at 17:1 CR is here:
> >
> >
> http://cgpl.iisc.ernet.in/site/Portals/0/Publications/ReferedJournal/Biomass%20derived%20producer%20gas%20as%20a%20reciprocating.pdf
> >
> >
> >
> > regards
> >
> >
> >
> > Ken Boak
> >
> >
> > _______________________________________________
> > Gasification mailing list
> >
> > to Send a Message to the list, use the email address
> > Gasification at bioenergylists.org
> >
> > to UNSUBSCRIBE or Change your List Settings use the web page
> >
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
> >
> > for more Gasifiers, News and Information see our web site:
> > http://gasifiers.bioenergylists.org/
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20121014/5c41e00d/attachment-0001.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Gasification mailing list
>
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
>
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> for more Gasifiers, News and Information see our web site:
> http://gasifiers.bioenergylists.org/
>
>
>
> ------------------------------
>
> End of Gasification Digest, Vol 26, Issue 9
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20121015/7c014ca6/attachment.html>
More information about the Gasification
mailing list