[Gasification] wood boiler o2 control

[Alex English]

I'll try the link again

http://www.burtsgh.com/dl/Mass_Biochar_2.pdf



On 16/02/2013 2:31 PM, Tom Miles wrote:
>
> Alex,
>
> It looks like the attachment may have been stripped. If you send it to 
> me at tmiles at trmiles.com <mailto:tmiles at trmiles.com> I'll re-post it 
> as a pdf.
>
> Tom
>
> *From:*Gasification 
> [mailto:gasification-bounces at lists.bioenergylists.org] *On Behalf Of 
> *english at kingston.net
> *Sent:* Saturday, February 16, 2013 10:51 AM
> *To:* Discussion of biomass pyrolysis and gasification
> *Subject:* Re: [Gasification] wood boiler o2 control
>
> Tom,
>
> There are a couple of slides in the following presentation which show 
> how I cobbled together an O2 control system with their old LM-1.
>
> The link on the slide is dead but google can help you find more on the 
> Bosch LSU4 sensor. Got four years out of the first sensor. A ittle 
> drift in the last year but still workable if you can check it against 
> a combustion analyser an adjust your controls  accordingly.
>
> Alex
>
> On Saturday 16/02/2013 at 11:29 am, tom caldwell wrote:
>
> Hi, I see on the hearth wood heating forum, that a inonvate 
> motorsports mtx is being used for wood boiler o2 control. Where would 
> I find info on this install?
>
> thanks
>
> tom caldwell
>
>
>
> _______________________________________________
> Gasification mailing list
>
> to Send a Message to the list, use the email address
> Gasification at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org
>
> for more Gasifiers,  News and Information see our web site:
> http://gasifiers.bioenergylists.org/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20130216/dee0798d/attachment.html>