[Gasification] Need for off-grid non-solar electricity where biomass is plentiful

Johan Swarts jpes at icon.co.za
Tue Nov 13 14:33:12 CST 2018


Hi Werner 

 

Please forward the prices to me as well please

 

Johan Swarts

 

From: Gasification <gasification-bounces at lists.bioenergylists.org> On Behalf Of Werner Rhein
Sent: Tuesday, 13 November 2018 10:08 PM
To: Discussion of biomass pyrolysis and gasification <gasification at lists.bioenergylists.org>
Subject: Re: [Gasification] Need for off-grid non-solar electricity where biomass is plentiful

 

Hello Greg,

 

The chip consumption of the Spanner units are around 1kg / kWh depending on quality of wood.

 

I have some prices for the Spanner units in Euro but need a bit of time to sort it out.

 

Regards,

 

Werner

 

 

 

On Nov 12, 2018, at 20:01, Anderson, Paul <psanders at ilstu.edu <mailto:psanders at ilstu.edu> > wrote:

 

Greg,

 

You are stating about 1 pound of biomass per 1 kWe.   The data sheet for Spanner is 0.9 kg per hour for 1 kWe (essentially your are half of their biomass consumption).

 

Do you have an estimate of price (maybe use Canandian costs) for have one unit made (not a DIY unit).    Maybe triple that cost to have the price for a model to be sold by a business.

 

Paul

 

Doc / Dr TLUD / Paul S. Anderson, PhD

Exec. Dir. of Juntos Energy Solutions NFP

Email:   <mailto:psanders at ilstu.edu> psanders at ilstu.edu       Skype:   paultlud

Phone:  Office: 309-452-7072    Mobile: 309-531-4434

Website:    <http://www.drtlud.com/> www.drtlud.com

 

From: Gasification <gasification-bounces at lists.bioenergylists.org <mailto:gasification-bounces at lists.bioenergylists.org> > On Behalf Of Greg Manning
Sent: Monday, November 12, 2018 12:15 PM
To: Discussion of biomass pyrolysis and gasification <gasification at lists.bioenergylists.org <mailto:gasification at lists.bioenergylists.org> >
Subject: Re: [Gasification] Need for off-grid non-solar electricity where biomass is plentiful

 

Greetings Paul, and List members !

 

As far as input goes, from 10lbs. An hour and up. Output from, 10 to 30 kwE 

 

The original design had a direct coupled Chevy 350, however I have since changed to a belt driven system, this way "what's available" can  be used as a prime mover. 

 

As far as operation, and use, a 2 day training for someone that has very basic skills in mechanics for servicing, and a 1 day for people that will be gathering and/or preperation of the biomass.

As far as replication, off the North American continent  a person with oxygen/acetylene torches could build it other than the actual generator.
Greg.

On Sun, Nov 11, 2018, 4:27 PM Anderson, Paul < <mailto:psanders at ilstu.edu> psanders at ilstu.edu wrote:

Hi Greg,

 

Long time since we last communicated directly!   You are one of those who “do.”

 

Please tell us size (input, output, etc.) and the extent that it could  be replicated for large numbers of users.  How much “skill level” is needed by the users?   (YOU are not an average user.  Could others operate it if the system was available?)

 

Paul

 

Doc / Dr TLUD / Paul S. Anderson, PhD

Exec. Dir. of Juntos Energy Solutions NFP

Email:   <mailto:psanders at ilstu.edu> psanders at ilstu.edu       Skype:   paultlud

Phone:  Office: 309-452-7072    Mobile: 309-531-4434

Website:    <http://www.drtlud.com/> www.drtlud.com

 

From: Gasification < <mailto:gasification-bounces at lists.bioenergylists.org> gasification-bounces at lists.bioenergylists.org> On Behalf Of Greg Manning
Sent: Sunday, November 11, 2018 4:19 PM
To: Discussion of biomass pyrolysis and gasification < <mailto:gasification at lists.bioenergylists.org> gasification at lists.bioenergylists.org>
Subject: Re: [Gasification] Need for off-grid non-solar electricity where biomass is plentiful

 

Currently Busy with another project, HOWEVER, This post sparks my interest !

 

I do small scale biomass fired generation.

 

Greg Manning,

Canadian Gasifier Ltd.

 

On Sun, Nov 11, 2018 at 2:31 PM Anderson, Paul < <mailto:psanders at ilstu.edu> psanders at ilstu.edu> wrote:

Tom and all,

 

Please guide us (as a start) to understanding the needs and realities of off-grid non-solar power where biomass is plentiful.   Are there some key links?  

 

Low-population, forested high latitude areas (less sunlight) without easy boat or train access would seem to be a major geographic region of need.  Diesel generators seem to dominate the power generation.   What sources confirm these statements, how big is the problem (expressed as numbers of gensets at what sizes), and what is being done about it, and by whom?    (Canadians, please reply with your info.)

 

This should be a significant topic for this Listserv.

 

Paul

 

Doc / Dr TLUD / Paul S. Anderson, PhD

Exec. Dir. of Juntos Energy Solutions NFP

Email:   <mailto:psanders at ilstu.edu> psanders at ilstu.edu       Skype:   paultlud

Phone:  Office: 309-452-7072    Mobile: 309-531-4434

Website:    <http://www.drtlud.com/> www.drtlud.com

 

From: Gasification < <mailto:gasification-bounces at lists.bioenergylists.org> gasification-bounces at lists.bioenergylists.org> On Behalf Of  <mailto:tmiles at trmiles.com> tmiles at trmiles.com
Sent: Sunday, November 11, 2018 1:13 PM
To: 'Discussion of biomass pyrolysis and gasification' < <mailto:gasification at lists.bioenergylists.org> gasification at lists.bioenergylists.org>
Subject: Re: [Gasification] APL Gasifier in the Microgrid at the 2018 Verge Conference

 

Are you in a marine air environment? There are many villages that need electricity in low coastal areas..

 

Tom

 

_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
 <mailto:Gasification at bioenergylists.org> Gasification at bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
 <http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
 <http://gasifiers.bioenergylists.org/> http://gasifiers.bioenergylists.org/

_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
 <mailto:Gasification at bioenergylists.org> Gasification at bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
 <http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org> http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
 <http://gasifiers.bioenergylists.org/> http://gasifiers.bioenergylists.org/

_______________________________________________
Gasification mailing list

to Send a Message to the list, use the email address
Gasification at bioenergylists.org <mailto:Gasification at bioenergylists.org> 

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/gasification_lists.bioenergylists.org

for more Gasifiers,  News and Information see our web site:
http://gasifiers.bioenergylists.org/

 



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/gasification_lists.bioenergylists.org/attachments/20181113/40df99a3/attachment.html>


More information about the Gasification mailing list