[Greenbuilding] Fixture Folly

[bill.allen at verizon.net]

Ben,
What "acid" do you use?  I haven't found anything common that works.
Thanks,
Bill

-----Original Message-----
From: Benjamin Pratt <benjamin.g.pratt at gmail.com>
Sender: greenbuilding-bounces at lists.bioenergylists.org
Date: Mon, 19 Dec 2011 15:53:23 
To: Green Building<greenbuilding at lists.bioenergylists.org>
Reply-to: Green Building <greenbuilding at lists.bioenergylists.org>
Subject: Re: [Greenbuilding] Fixture Folly

just remove the old one, clean it up (use an acid to get rid of all
the calcium and lime deposits if neccessary), go to the hardware store
and get new washers, o rings, and seats if it needs them.
Should work as good as new, cost you less than 10 bucks, and still be
original to the house (if that matters).
I've done this many times--did one just yesterday, actually.

Remember "renew" is one of the 3 R's

Ben



On Mon, Dec 19, 2011 at 12:45 PM, Kat <molasses at q.com> wrote:
> It's not the valves that limit the shower output, it's the shower head.
>
> It sounds to me like just about any modern tub fixture would meet your
> needs.  I guess maybe I don't quite understand the problems.
>
> -Kat
>
>
> On 12/19/2011 8:22 AM, J M Alden wrote:
>>
>>
>>        Shower fixtures only do 2.5 gallons per minute.  So if I tried to
>> go with shower controls, I guess I'd have to go with two sets, which seems
>> unnecessarily clumsy.
>>
>>
>>
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org



-- 


b e n j a m i n p r a t t

professor art+design
the university of wisconsin stout

_______________________________________________
Greenbuilding mailing list
to Send a Message to the list, use the email address
Greenbuilding at bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org