[Greenbuilding] tung oil
Jason Holstine
jason at amicusgreen.com
Thu Nov 3 12:44:14 CDT 2011
Exactly the more the coats the more it¹ll build up and could go glossier.
Buff it for more sheen.
On 11/3/11 12:57 PM, "Gennaro Brooks-Church - Eco Brooklyn"
<info at ecobrooklyn.com> wrote:
> Thanks Steve. That is interesting.
>
> Gennaro Brooks-Church
> 347-244-3016
> Sent from my phone
>
> On Nov 3, 2011 12:47 PM, "natural building" <naturalbuilding at shaw.ca> wrote:
>> Hey Gennaro,
>>
>> I've never used Tung Oil myself, but talking recently with another woodworker
>> who uses it a lot he explained that you need to build up multiple layers of
>> TO to get the shiny finish, (up to seven layers on wood) and once you do, it
>> is very tough and resilient.
>>
>> It is only matte as long as it is being absorbed. Once it has sealed, any
>> additional layers oxidize on the surface and can be highly polished.
>>
>> Cheers,
>> Steve.
>>
>> Steve Satow
>>
>> www.naturalbuildingsite.net <http://www.naturalbuildingsite.net>
>> naturalbuilding at shaw.ca
>>
>> On 2011-11-03, at 9:34 AM, Gennaro Brooks-Church - Eco Brooklyn wrote:
>>
>>> Interesting. My experience is tung is matte. Maybe it was the wood
>>>
>>> Gennaro Brooks-Church
>>> Director, Eco Brooklyn Inc.
>>> Cell: 1 347 244 3016 <tel:1%20347%20244%203016> USA
>>> www.EcoBrooklyn.com <http://www.EcoBrooklyn.com/>
>>> 22 2nd St; Brooklyn, NY 11231
>>>
>>>
>>>
>>> On Thu, Nov 3, 2011 at 12:28 PM, Joe Killian <kaa-ajk at sonic.net> wrote:
>>>>
>>>> Don't know about mixing with citrus or linseed, but I do know that Tung
>>>> Oil itself gives a shinny finish like a varnish, not at all like an oil
>>>> finish (discovered to my dismay after accepting an offer to refinish a good
>>>> coffee table with Tung Oil).
>>>>
>>>> Joe
>>>>
>>>>
>>>>
>>>> On 11/3/2011 8:10 AM, Gennaro Brooks-Church - Eco Brooklyn wrote:
>>>>> Hello,
>>>>> I'm interested in your experience with mixing tung oil, citrus solvent and
>>>>> linseed oil for floors. My experience is that linseed leaves more of a
>>>>> shinny coating which sort of replicates typical varnish. Does anyone have
>>>>> suggestions on floor applications? Just tung and citrus? Or is putting a
>>>>> little linseed better?
>>>>>
>>>>> Thanks!
>>>>> Gennaro Brooks-Church
>>>>> Director, Eco Brooklyn Inc.
>>>>> Cell: 1 347 244 3016 <tel:1%20347%20244%203016> USA
>>>>> www.EcoBrooklyn.com <http://www.EcoBrooklyn.com/>
>>>>> 22 2nd St; Brooklyn, NY 11231
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Greenbuilding mailing list
>>>>> to Send a Message to the list, use the email address
>>>>> Greenbuilding at bioenergylists.org
>>>>>
>>>>> to UNSUBSCRIBE or Change your List Settings use the web page
>>>>> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioen
>>>>> ergylists.org
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Greenbuilding mailing list
>>>> to Send a Message to the list, use the email address
>>>> Greenbuilding at bioenergylists.org
>>>>
>>>> to UNSUBSCRIBE or Change your List Settings use the web page
>>>> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioene
>>>> rgylists.org
>>>
>>> _______________________________________________
>>> Greenbuilding mailing list
>>> to Send a Message to the list, use the email address
>>> Greenbuilding at bioenergylists.org
>>>
>>> to UNSUBSCRIBE or Change your List Settings use the web page
>>> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioener
>>> gylists.org
>>
>>
>> _______________________________________________
>> Greenbuilding mailing list
>> to Send a Message to the list, use the email address
>> Greenbuilding at bioenergylists.org
>>
>> to UNSUBSCRIBE or Change your List Settings use the web page
>> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenerg
>> ylists.org
>
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergy
> lists.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20111103/d2b45fcd/attachment.html>
More information about the Greenbuilding
mailing list