[Greenbuilding] Door frames and gaskets
RT
archilogic at yahoo.ca
Tue Aug 20 08:06:06 CDT 2013
On Tue, 20 Aug 2013 00:53:21 -0400, <bill.allen at verizon.net> wrote:
> I have been trying to picture/design the "close on top" door but haven't
> come up with a good solution yet. The devil is in the details...if
> anyone can point me to any examples I could use as a model,
>
> I do plan to have a storm door so that will help a little.
Bill;
You only need to look as far as your storm door (or store-bought aluminum
storm doors) for a model.
They come with a "frame" that puts the door outside of the plane of the
wall an amount that is the thickness of the door and moves the pivot point
of the hinge to outside of the outside face of the door.
I've done the same with storm doors that I've made out of 2x6 lumber,
making a frame out of 2x4 lumber that clips to the outside of the opening.
I suspect that if you were to Google "Walk-in refrigerator plans" you
should get some hits on how they configure the doors for the walk-in
refrigerators that are typically made by the builder for small
restaurants, neighbourhood grocers etc.
--
=== * ===
Rob Tom AOD257
Kanata, Ontario, Canada
< A r c h i L o g i c at Y a h o o dot c a >
(manually winnow the chaff from my edress if you hit "reply")
More information about the Greenbuilding
mailing list