[Greenbuilding] taping plywood seams vs. vapor barrier

[gennaro brooks-church]

Sam
This is in NYC so they are brick brownstones.

Gennaro Brooks-Church
EcoBrooklyn.com
347-244-3016
22 2nd St., Brooklyn.
This email was sent from my phone.

On Jul 1, 2013, at 8:53 AM, Sam Ewbank <g.l.ewbank at gmail.com> wrote:

Gennaro-What do you use as a weather control barrier over the plywood?

Rueben- One west coast supplier of SIGA brand tapes is Small Planet
Workshop.
http://www.smallplanetworkshop.com/siga-the-company-products/

I've had good luck using 3-m 8067 all weather flashing tape around windows
but don't know if it will last as long as the SIGA

Sam

On Mon, Jul 1, 2013 at 8:15 AM, gennaro brooks-church
<gennarobc at gmail.com>wrote:

> We have done this in the Passive House community. Use a good tape.
> Call my friends at 475. They have tape.
>
> Gennaro Brooks-Church
> EcoBrooklyn.com
> 347-244-3016
> 22 2nd St., Brooklyn.
> This email was sent from my phone.
>
> On Jul 1, 2013, at 1:46 AM, Reuben Deumling <9watts at gmail.com> wrote:
>
> > If I carefully tape all the seams on the plywood sheathing, and achieve
> the dense pack cellulose I'm aiming for, is there a reason to also use a
> Tyvek type paper on the exterior as well?
> > _______________________________________________
> > Greenbuilding mailing list
> > to Send a Message to the list, use the email address
> > Greenbuilding at bioenergylists.org
> >
>
>  _______________________________________________
Greenbuilding mailing list
to Send a Message to the list, use the email address
Greenbuilding at bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.bioenergylists.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20130701/59259ab0/attachment.html>