[Greenbuilding] translucent material needed

[Norbert Senf]

Here's a two layer polycarbonate panel:
http://www.greenhousemegastore.com/product/polycarbonate-panel-8mm-clear/greenhouse-polycarbonate-sheets

We have something similar on our sunspace that is three layer, but can't
remember the name.

On Fri, Jun 30, 2017 at 12:36 PM, Sacie Lambertson <
sacie.lambertson at gmail.com> wrote:

> All, since there remains a bit of life on this forum, I thought I would
> ask if any of you have a suggestion for a material that has some R-value to
> it but is at the same time translucent.  Much like Kalwal is, if any of you
> are familiar with that product.
>
> I have three windows in a bay through which I want good light but at the
> same time also want to add another layer on the interior side of the
> windows that might make the openings more energy efficient.  The windows
> will never be opened but I do want light through them during the day.  They
> will have glass shelves in front of them too so shades etc are not in the
> cards.
>
> Suggestions welcome.  At 28" x 72" the windows are huge holes in this
> room.  I want to modify this.
>
> thanks, Sacie
>
> _______________________________________________
> Greenbuilding mailing list
> to Send a Message to the list, use the email address
> Greenbuilding at bioenergylists.org
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/greenbuilding_lists.
> bioenergylists.org
>



-- 
Norbert Senf
Masonry Stove Builders
25 Brouse Road, RR 5
Shawville Québec J0X 2Y0
819.647.5092
www.heatkit.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/greenbuilding_lists.bioenergylists.org/attachments/20170702/3a6684c8/attachment.html>