[Stoves] fan expertise?

[Ron]

Paul O

    To gain the wisdom that is out there.

   Also to see if anyone is working,  like you, with pre-mixing.

   My thoughts aren't yet well enough formed to bother a whole group - but I am thinking open 
source, like you

Ron


On May 25, 2013, at 4:34 PM, Paul Olivier <paul.olivier at esrla.com> wrote:

> Ron,
> 
> Why discuss this on the list?
> 
> Paul
> 
> 
> On Sat, May 25, 2013 at 7:35 PM, Ron <rongretlarson at comcast.net> wrote:
> Paul
> 
>     Thanks for guidance.
> 
>     The reason for not discussing on the list?
> 
> Ron
> 
> 
> 
> On May 24, 2013, at 11:08 PM, Paul Anderson <psanders at ilstu.edu> wrote:
> 
>> Ron, 
>> 
>> On behalf of myself and two who are not subscribed to the Stoves Listserv (Hugh McLaughlin and another Ron, last name Vanetten, who is working with me in Normal Illinois), we each respond "Count me in."
>> 
>> Once you have your concept in an explainable form (words, diagrams, etc), please consider sending it to those whom YOU select to be included in the early stages of development.   But this should not be an open discussion on the Listserv.  You have started to form the group.   Let's see who might be qualified to be in the inner circle.  Then Ron V. and I and others can also share our progress.
>> 
>> I hope that you might be surprised at how far some of us have progressed in that direction, or what we can contribute to make your initial mockup easier and better.   
>> 
>> Paul
>> Paul S. Anderson, PhD  aka "Dr TLUD"
>> Email:  psanders at ilstu.edu   Skype: paultlud  Phone: +1-309-452-7072
>> Website:  www.drtlud.com
>> On 5/24/2013 5:48 PM, rongretlarson at comcast.net wrote:
>>> List:
>>> 
>>>     I have a conceptual design for a different type of TLUD  (squat, extensive preheating of both types of air, balancing of their ratio, and a pre-mixed flame).  More costly than using one can above another, but maybe less costly over long run, through increased lifetime, efficiency and good turn down ratio.  Might be able to modify to enable natural draft.  Lots of unknowns still.
>>> 
>>>      I'd appreciate joining forces with anyone, but especially those now working with fans and fan controllers.
>>> 
>>>     Hoping for a mockup to take to Dean Still's summer camp.
>>> 
>>> Ron
>>> 
>>> 
>>> _______________________________________________
>>> Stoves mailing list
>>> 
>>> to Send a Message to the list, use the email address
>>> stoves at lists.bioenergylists.org
>>> 
>>> to UNSUBSCRIBE or Change your List Settings use the web page
>>> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>>> 
>>> for more Biomass Cooking Stoves,  News and Information see our web site:
>>> http://stoves.bioenergylists.org/
>>> 
>> 
> 
> _______________________________________________
> Stoves mailing list
> 
> to Send a Message to the list, use the email address
> stoves at lists.bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
> 
> for more Biomass Cooking Stoves,  News and Information see our web site:
> http://stoves.bioenergylists.org/
> 
> 
> 
> 
> 
> -- 
> Paul A. Olivier PhD
> 26/5 Phu Dong Thien Vuong
> Dalat
> Vietnam
> 
> Louisiana telephone: 1-337-447-4124 (rings Vietnam)
> Mobile: 090-694-1573 (in Vietnam)
> Skype address: Xpolivier
> http://www.esrla.com/
> _______________________________________________
> Stoves mailing list
> 
> to Send a Message to the list, use the email address
> stoves at lists.bioenergylists.org
> 
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
> 
> for more Biomass Cooking Stoves,  News and Information see our web site:
> http://stoves.bioenergylists.org/
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20130525/a179f939/attachment.html>