[Stoves] IGNITION : gas , wood pineappels and charcoal carbon
Frans Peeters
peetersfrans at telenet.be
Sat Jul 19 17:17:23 CDT 2014
Dear Andrew and all,
An etheric gas ignites with the smalest electrostatic spark but
diesel fuel vapor needs 10- 20 KiloVolt over a spark plug, 50watt 12 V
convertor you can make from a car ignition coil plus tyristor and diac or
THT TV coil plus 2 power transistors 2N3055 .
For wood strips or pineappels you need a transformer 50-100 watt 110
or 240 to 3V 15 amp means 3mm2 Cu wire ; A resistor red glowing stainless
wire 100x0,8 mm welding wire NiCr .
For charcoal depending the size powder or peaces you best use 100 watt 20
amps 5volt over a yellow hot welding wire of 100 x0,8 mm. Or wolfram or
renium .
Two parallel horizontal wires of 200mmx 2 mm,3mm separate into the gasifier
is a helpfull reigniter for smoke . With photocell you make it auto restart
!
PE shopping bags briquette binder OK for you but learn your naighbour
:microwave foil;tranparant electro pacage; praline transparent boxes can be
PVC and give 60 % HCl =22,4 Liter / 36 gram and your garden will die in no
time .
Test every unknown peace on WHITE HCl smoke with your refil bick gas igniter
.
Regards
Frans.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20140720/cab86510/attachment.html>
More information about the Stoves
mailing list