[Stoves] GLASS for stoves .

[lh cheng]

thank you Frans, I knew there must be some product there, already or soon.
a little bit too expensive. but if widely used, the cost will go down, so
will the price.
in my point of view, every stove should have glass. that is a huge market.

2017-12-24 9:26 GMT+08:00 Frans Peeters <peetersfrans at telenet.be>:

> Mr CHENG and  Mr Andrew
>
>
>
>        For stoves ,cassettes open fires with window doors  CERAMIC GLASS
> is used. Produced in France and JAPAN .
>
> Best put between 2 joints of soft silicates –foams.
>
>       If we go to an  open-fire builder seller an doorwindow glass cost
> 200 € in KASTERLEE but only 100€  in a glass workshop at HERENTALS
> /BELGIUM  20 Km further,for  a  40x70 cm peace .
>
> The frame must be made from L 40X40X3 mm steel as 20x20X2 stainless
> deforms by heat !!
>
>      I use a TLUD inside a cassette stove with a window ;not for cooking ,
> All self made ,welded .
>
> an El.steamcooker 900 W is easyer . 30 minutes for 2 meals =0,5 KWh power
> used . Cooker cost 50-100 €
>
> TLUD from expansion vessel made weight 9Kg use 5Kg twigs/pine-appels/ hour
>
> Chimney 8 m high .
>
>
>
>    So LOOK OUT were to buy glass !
>
>
>
>
>
>
>
> Regards
>
> Frans
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20171224/9827aad2/attachment.html>