[Stoves] Dhan Hurley..... TLUD enhancements.... Why aren't there any comments, except from what it seems is a Venture Capital Company?

Sun Jun 2 14:11:48 CDT 2019

Hi, 

If this nonsense is all i can get, see below, then i am going to leave this List.
Is this another Suppresion Site?

I can make a bicycle light as strong as a car light.
If i utilise the Heaviside Energy component,which is wasted on Single Pass circuits, then i could make it as strong as you want. Read about Kraus Contours, which are experimental not theoretical.

I know of many different configurations of materials for THERMOCOUPLES.Check-out the BMW car Thermocouple,attached to the Exhaust.

Joule Thief Circuits are a very simple, passive, Self-Resonant circuits that increase very low voltages,to whatever you want, within reason, 100 VOLT or 230 VOLT, no problem.
Obviously you know nothing about SCHAUBERGER's work with VORTEX and IMPLOSION technology.Even Implosion motors.
If i talk about OVER-UNITY ( so-called "FREE-ENERGY" ) systems then you would be out-of-your-depth.
The LUFO Oil Light ( kerosene etc. ) with the Thermocouple,on the top, originally had a 7 VOLT plugand a RADIO, in the bottom section. The version that is for sale now only has a RADIO.
READ about what happened to the LUFO team below.Essentialy it was suppressed.
Why don't you comment on the attempt to PATENT this idea? See my reply below, also.
Dhan Hurley,

DIASPORA COMMUNITY.... My PROFILE PAGE :- 
IRISH, MUSICIAN, POET, PHYSICS, “FREE-ENERGY”, LINUX PROFI, ALTERNATIVE SYSTEMS, GEOPOLYMERS, ALTERNATIVE HEALTH-FARMING-MATERIALS,ORMUS, MYSTIC, etc.

https://despora.de/people/6d39a7e04a610132027a42cdb1fcde73

      From: peeters frans <peetersfrans at telenet.be>
 To: 'DHAN HURLEY' <dhanhurley at rocketmail.com>; 'Discussion of biomass cooking stoves' <stoves at lists.bioenergylists.org> 
Cc: Crispinpigott at outlook.com; "Boll, Martin Dr." <boll.bn at t-online.de>; franke at cruzio.com
 Sent: Saturday, June 1, 2019 11:56 PM
 Subject: RE: [Stoves] Dhan Hurley..... TLUD enhancements.... Why aren't there any comments, except from what it seems is a Venture Capital Company?

#yiv4269419621 #yiv4269419621 -- _filtered #yiv4269419621 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv4269419621 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv4269419621 {panose-1:2 11 6 9 4 5 4 2 2 4;}#yiv4269419621 #yiv4269419621 p.yiv4269419621MsoNormal, #yiv4269419621 li.yiv4269419621MsoNormal, #yiv4269419621 div.yiv4269419621MsoNormal {margin:0cm;margin-bottom:.0001pt;font-size:12.0pt;font-family:New serif;}#yiv4269419621 h1 {margin-right:0cm;margin-left:0cm;font-size:24.0pt;font-family:New serif;}#yiv4269419621 a:link, #yiv4269419621 span.yiv4269419621MsoHyperlink {color:blue;text-decoration:underline;}#yiv4269419621 a:visited, #yiv4269419621 span.yiv4269419621MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv4269419621 p.yiv4269419621msonormal0, #yiv4269419621 li.yiv4269419621msonormal0, #yiv4269419621 div.yiv4269419621msonormal0 {margin-right:0cm;margin-left:0cm;font-size:12.0pt;font-family:New serif;}#yiv4269419621 span.yiv4269419621Kop1Char {font-family:sans-serif;color:#2E74B5;}#yiv4269419621 span.yiv4269419621E-mailStijl20 {font-family:sans-serif;color:#1F497D;}#yiv4269419621 .yiv4269419621MsoChpDefault {font-size:10.0pt;} _filtered #yiv4269419621 {margin:70.85pt 70.85pt 70.85pt 70.85pt;}#yiv4269419621 div.yiv4269419621WordSection1 {}#yiv4269419621 Dear DHAN,     It looks like ,you have lots of dreams on principles ,But reality is mV for thermocouples and WATTS for ENERGY , with VOLT and low amps ,you light only dreams . So speak about a working realization…..    At 12 y my dream was making a bicycle light ,as strong as a cars light with an induction coil and car bulb ……I could make 12 V  out of 6 V, but the light was lower …!Why ? POWER is not transformed !!!         Copper/iron constantan is the thermocouple with the most millivolt.     Ni/ CrNi most used .      We think the burn-speed is most important for a TLUD STOVE  and see 3 zones 0-400° C/ 400-800 ° C/800°-1200° C .  In a SOUTH AFRICAN UNIV. You find Mr CRISPINS stove designs ! For the NGO world !Africa /AsiaNot a venture company ! Regards,  F.    Van: Stoves [mailto:stoves-bounces at lists.bioenergylists.org] Namens DHAN HURLEY
Verzonden: zaterdag 1 juni 2019 19:02
Aan: stoves at lists.bioenergylists.org
Onderwerp: [Stoves] Dhan Hurley..... TLUD enhancements.... Why aren't there any comments, except from what it seems is a Venture Capital Company?    Hi from Tübingen, S. Germany.  I sent the following email to  stoves at lists.bioenergylists.org . Why aren't there any comments,except from what it seems is a Venture Capital Company?   I have been experimenting with TLUD's.Using an insulating "jacket", i have been using ROCKWOOL with a wire mesh support, is an improvement. My next improvements will be :- 1)  SPIRAL outer Air-Channels ( TUBES ) for increased air pre-heating.Also for creating a VORTEX ( CYCLONE ) EFFECT at the combustion site,thus causing better combustion and a better suction of air into the TUBES.This would also enable a more compact and stable TLUD,good for camping etc. I will have to study some of my research into  VIKTOR SCHAUBERGER's VORTEX and IMPLOSION technology. There is a high probability, that with the correct adaptations, a FAN ASSISTED air up-draft won't be necessary. 2) A THERMOCOUPLE,which is very cheap to buy or very simple and easy to make yourself,even from readily available scrap materials, e.g. GRAPHITE and ALUMINIUM.This would provide more than the necessary power for a FAN, RADIO, TRANSMITTER,LIGHTS,  BATTERY CHARGER etc. 3)A SUPERCAPACITOR ( possibily ) instead of a BATTERY for powering the FAN when starting the stove,also for storing excess electric charge,which can be used later.A SUPERCAPACITOR is inexpensive and also very easy and simple to make yourself. 4)Using a "JOULE THIEF" electronic ( Self-Resonant ) circuit(s) with 2) and 3) above.This , again, is very inexpensive,simple and easy to make, even from scrap components.With this type of circuit you can increase the electric voltage output to whatever voltageyou want, within certain limits. Sincerely, Dhan Hurley                          *******************************************************

THE ONLY REPLY IS  FROM   kchisholm-inter at uniserve.com  :- 

Hi DhanI am very impressed with your work, and thinking!!I have an interesting proposal for you:1: I assign patent rights to you for an assemblage of ideas, relating to your work below, that could lead to a “world class patent”, in return for a 2% royalty on sales above $100,000.2: If you wish, I will do detailed design and construction of the system, and you would only pay for “out-of-pocket” costs that you approve beforehand. How’s that sound to you?Best wishes,  Kevin Chisholm, P. Eng, (Mech.)                                         *************************************************************

  MY REPLY TO KEVIN CHISHOLM is below :-  Hi Kevin,I thank you very much indeed for your kind and generous offer.To me, it seems better for me to release this without a Patent.Anybody, including you,can create a business making these TLUD'swith the enhancements i have outlined below.I know that designs can be patented.  I am very open to donations for my present and future work.  I know some Swiss people who designed an Oil Light ( Kerosene, etc. ) with a Thermo-Couple built into the top, named LUFO.This was based on a Russian model from the Second World War.They patented the design, which had a radio and an electric power plug ( 7 volt ).The United Nations said that they were interested.All that happened is that they were "played-with" for 6 years.The person i knew had a debt of CHF 400,000, after that "run-around".  The excerpt below is from a very good site called  https://eagle-research.com/ , which makes and sells Brown's Gas machines, Kits, books etc.

https://eagle-research.com/mission/patent-free/
Patent Free
MAKE MONEY WITHOUT PATENTING!!!To continue inventing practical energy solutions, I make money immediately by selling books and kits, instead of spending thousands of dollars and years of time getting a patent. Investing the time and money into getting a patent does not give any guarantee you’ll make money. Selling books and product makes money immediately. Investing the time and money (that you would have spent acquiring a patent) into product development instead, will give you a much better chance of getting the product into the marketplace and give you money in your pocket. Not to say that patents aren’t an applicable tool in some situations, they just aren’t good for inventors in my situation. Nondisclosure agreements, trademarks and copyrights are inexpensive, fast, sufficient and reasonable protection.Several inventors have now seen what I’ve accomplished and are switching to my methods. CAN YOU FIGHT? A patent is only as good as your ability to fight for it. The patent office does not help you, except to provide a service to prove that you patented your device on a particular date. You fight your opponent in court at your own expense. Your chance of winning is not assured because there are many slippery ways around the patent laws.So you may have paid lots of money getting a patent, set your marketing back several years because of secrecy and STILL not be able to prevent competition. In fact, you spend even more money (and time) trying to defend the undefendable.Patents are an exceptionally bad idea for innovators with limited funds. Often Patents are ‘stolen’ and used without the innovators concent because the thief knows that the innovator does not have the money to take them to court.......................................................  continued    Again, thank you for the your interest and work.I hope we can continue developing these and other devices.Yours sincerely,Dhan Hurley DIASPORA COMMUNITY.... My PROFILE PAGE :- 

IRISH, MUSICIAN, POET, PHYSICS, “FREE-ENERGY”, LINUX PROFI, ALTERNATIVE SYSTEMS, GEOPOLYMERS, ALTERNATIVE HEALTH-FARMING-MATERIALS,ORMUS, MYSTIC, etc.

https://despora.de/people/6d39a7e04a610132027a42cdb1fcde73  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20190602/97da640f/attachment.html>