[Stoves] ***SPAM*** TLUD gas mixing

[Ashok Mathur]

Perhaps if a lathe is used to carve a spiral on the lower concical surface(s), better diffusion, may take place.the spiral would impart a centrifugal force to the gases.RegardsAshok

Sent from Yahoo Mail for iPhone


On Sunday, July 16, 2023, 6:59 AM, Ashok Mathur <ashokchand2000 at yahoo.com> wrote:

Fascinating for its clear exposition of the 3 diffusion mechanisms. But the description of the shorter bluff bodies is not yet clear.Best wishesAshok


Sent from Yahoo Mail for iPhone


On Sunday, July 16, 2023, 12:26 AM, Harris, Kirk <gkharris316 at comcast.net> wrote:

Hi All,

Attached is a document showing some interesting things I have been 
working on.  A stove with the single specialized bluff body tested 
exceptionally clean at Aprovecho (6-23-23).  Perhaps not of any use, but 
maybe interesting to some.

Kirk H.


-- 
This email has been checked for viruses by AVG antivirus software.
www.avg.com_______________________________________________
Stoves mailing list

to Send a Message to the list, use the email address
stoves at lists.bioenergylists.org

to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org

for more Biomass Cooking Stoves,  News and Information see our web site:
http://stoves.bioenergylists.org/







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.bioenergylists.org/pipermail/stoves_lists.bioenergylists.org/attachments/20230716/7c4b66a5/attachment.html>