[Gasification] Syngas, why not just fix it?
Bill_Klein at 3iAlternativePower.com
Fri Jan 28 18:48:36 CST 2011
Well put, Doug
I would like to stick my oar into this ever muddier pond.
Diesel, kerosene, gasoline, petrol, producer gas, syngas, woodgas and a rose .
We know what these are, but, it seems, some who are not too familiar with the words would do well to learn what each is rather than trying to change something of which they have limited knowledge.
Get over it and deal with reality!
East is east and west is west. Producer gas is well known by those of us who spend their lives smelling it. I've made syngas. Like most things, it doesn't smell like producer gas.
Still not convinced?
A rose, by any other name is still a rose!
----- Original Message -----
To: Discussion of biomass pyrolysis and gasification
Sent: Friday, January 28, 2011 6:37 PM
Subject: Re: [Gasification] Syngas, why not just fix it?
Hi Pete and Colleagues,
Seeing as you ask, this is what can be offered:
> This topic sure has taken up a lot of time.
We can talk about multiple subjects at the same time on this forum, and you select that which interests you the most. However, there are not many who contribute enough to keep minds interested in the mundane issues like correct use of terminology.
>Why not just fix it if y'all don't like it the way it is?
This forum is an interest group and has no mandate from any authorizing body to set standards or definitions. We are also very International in our location, and therefore subject to working within certain set standards, set by our administrations.
> Earlier I suggested that the analysis of this mystery gas might fit
> into some numbering system, as is done with steel.
We make gas that already has set boundaries as to it's correct identification, but to create a system based on numbers would require accurate gas analysis for everyone involved. Many factors can affect the gas volumes,etc, depending on the scales of gas production, and fuels used, plus seasonal variations that play havoc with the same process.
> It seems to me that this group is the right one to do it.
> One could at least deal with the top half dozen components, couldn't one?
Well, we certainly have plenty of knowledge, but we see only a fraction of those belonging to this Forum contributing informed comment.
> Again, back to the steel analogy--- we don't have any problems talking
> about A36, 1018, W1, etc..
Having been defined by the steel industry, makes it easy for the steel fabricators to use numbers. Shock horror if you aren't aware as an amateur fabricator, and only think of iron,steel, tool steel, stainless steel, so not everyone who talks about the subject, is on the same wave length. Like any technology, you have to make the effort to learn about the differences, then be more constructive in how you participate,
> Maybe, a letter for the top component?
> Maybe a 2 tier system,; one for those gases with N2 and one for those
Producer gas, and Syngas identify these two gases, how complicated is that to understand?
> Maybe someone could at least tell me why this shouldn't be done now?
Quite simply, it has been done, but clearly some would rather ignore correct definitions for reasoning of their own. The market place remains very confused by how gasification is presented, and the EU took the initiative in 2008-9, to set guidelines that can be used by all involved, and be more informed with gasification projects. It's was a huge job, involved many institutions, and is only a beginning to bring some order into the implementation of gasification. The work has to be seen as on-going, and maybe we can ask Harrie Knoef of BTG to explain their progress, as I have current no on-line reference.
Gasification mailing list
to Send a Message to the list, use the email address
Gasification at bioenergylists.org
to UNSUBSCRIBE or Change your List Settings use the web page
for more Gasifiers, News and Information see our web site:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Gasification