[Gasification] Chip Guillotine
Doug.Williams at orcon.net.nz
Mon Dec 30 14:08:31 CST 2013
Hi Paul and Jeff,
I take note of your individual situations (fiddle while Rome burns) (:-) so opened up the workshop to see what I could do to at least sort out some practical input to your needs. Time is my enermy, but you both need to be a little more specific as to the diameters of the sticks you wish to chop in this devise. All the materials are on the bench, so I need some diameters pronto, or this day will be lost.
On Sun, 29 Dec 2013 17:51:05 -0500
Jeff Davis <jeffdavis0124 at gmail.com> wrote:
> Hi Paul,
> Traveling in the winter is the most difficult time of the year for me or
> even greeting people here (North West PA). Also, some time is needed to
> start any project so I propose we keep our (most) communication on this
> list where others can participate if they so desire.
> I travel to Indiana to participate in a few guitar events so maybe one
> of those times I could head over your way and or, in the non-winter, you
> might be in my neighborhood.
> For the most part it's an easy fab project. The disc is about 1 foot in
> dia. An old saw blade might be too thin. Maybe an old sprocket or maybe
> I could sub that out or flame cut it from stock. I think mild steel
> would be fine to start with. Maybe a field disc but they are not flat.
> Hmmm, the more I think about it, subing it out, might be a bad idea
> because you'll want a design that is doable in a 3rd world environment.
> Bottom line - it's a deal.
More information about the Gasification